Post Your Pics!!!
Here is a pic of my work in progress. 1990 Toyota Deluxe 4x4. Pretty much stock, but thats the way I like it. I'd love to try and score a nice set of original Toyota aluminum rims for it.
Been wanting to do a few things like new clutch/ brakes/ cold air induction and a new paint job is really needed.

The old window tint was getting on my nerves.

Been wanting to do a few things like new clutch/ brakes/ cold air induction and a new paint job is really needed.

The old window tint was getting on my nerves.

Thanks MB. I used a small aperture (big F number) to get it all in focus, and took three images at different exposure levels for high dynamic range.
That's a clean pickup Chris.
Washed my runners today

You would be surprised how little fender trimming you need for 37s, its mostly the fender well tubbing and firewall clearancing that fits the tires, provided you get the perfect backspacing on the wheels.
That's a clean pickup Chris.
Washed my runners today
You would be surprised how little fender trimming you need for 37s, its mostly the fender well tubbing and firewall clearancing that fits the tires, provided you get the perfect backspacing on the wheels.
Here's some pics that I've taken over the past month or so.
This clean little 4Runner pulled into work yesterday.

I lol'ed a little when I saw this

This is a customers rig. It's an 87 with an SAS. It has an OM617 swap with a bed mounted radiator. The 325/50/15 KM1s on 12" wide rims are kinda wild
He said the PO put those on.

Another customers rig. Pretty nice Taco.

And I took this one yesterday when it started snowing...
This clean little 4Runner pulled into work yesterday.

I lol'ed a little when I saw this

This is a customers rig. It's an 87 with an SAS. It has an OM617 swap with a bed mounted radiator. The 325/50/15 KM1s on 12" wide rims are kinda wild
He said the PO put those on. 
Another customers rig. Pretty nice Taco.

And I took this one yesterday when it started snowing...
I have a ball joint spacer kit, diff drop, new pan hard bar, battery box and proportioning valve to be installed on my truck, new O2 sensors for my wifes and a brake light switch for my Subie, and can't do any because of this...This was 2 weeks ago and we are supposed to be getting more anyday now....
at the end of my driveway

my place, with the wife's T4R in the drive

Same spot down the street

Same spot, other direction; (note the road on the left headed uphill)

I was painting in my garage and watched cars try to climb that hill until lunch that day. I was able to creep up it in 4HI and not a bit of wheel spin at 7 AM that morning. That is the only way into the neighborhood, and a lot of people just didn't go anywhere.
at the end of my driveway

my place, with the wife's T4R in the drive

Same spot down the street

Same spot, other direction; (note the road on the left headed uphill)

I was painting in my garage and watched cars try to climb that hill until lunch that day. I was able to creep up it in 4HI and not a bit of wheel spin at 7 AM that morning. That is the only way into the neighborhood, and a lot of people just didn't go anywhere.
work in progress
recently purchased 97 4runner. PO had sunk it in a creek and made a milkshake in trans all at the same time. Amazingly, flushed all fluids, changed plugs and battery. added gas and turned key it started right up.
Up to present, installed Spartan rear locker,2"BL, 3" toytec ultimate lift, spc upper control arms, fabbed grill front and rear bumper and sliders
Up to present, installed Spartan rear locker,2"BL, 3" toytec ultimate lift, spc upper control arms, fabbed grill front and rear bumper and sliders





















