muffler poll what are you running on your yota
#321
Ran straight pipe for a while on my 3.0 V6, sounded like a forklift I used to drive, ugh! Now I have a 2 1/2" piped resonator and a welded Flowmaster and out just after the rear tire. The guy at the muffler shop did an excellent job, tight and solid. It sounds so good I usually don't even listen to my stereo anymore.
#324
LCE 4-1, CA.-Legal Header.......

2.25" Pipe out........

OEM 02 installed(soon to be heated)....

Magnaflow 2.25" Highflow CAT into pretty old Borla Muffler.........

*****************************
I'm really happy with the set up, and it's got plenty of good thoaty sound without being ridiculously loud. Toward the top(3500-4500RPM) it really Cracks pretty well, too.


2.25" Pipe out........

OEM 02 installed(soon to be heated)....

Magnaflow 2.25" Highflow CAT into pretty old Borla Muffler.........

*****************************
I'm really happy with the set up, and it's got plenty of good thoaty sound without being ridiculously loud. Toward the top(3500-4500RPM) it really Cracks pretty well, too.
#325
sounds good chef, gonna have to make up some new videos of my setup. Maybe of one a little further away and a drive by. I've posted mine up a few times here. I think.
I want to get a cat put on mine, but haven't been able to pull the trigger on it yet though.
I want to get a cat put on mine, but haven't been able to pull the trigger on it yet though.
#326
THANKS, X! Always good to hear your advice or compliments...... or heck, even a slap in the mug when I need it! lol...
Yeah, I hear ya... You're in PA, so isn't yours around 60$ for a highflow 2.25"? Oh, but you have 2" pipe out the collector, right? Trying to remember.... Hmmm, my old brain is overwhelmed lately! lol.
Yeah, I hear ya... You're in PA, so isn't yours around 60$ for a highflow 2.25"? Oh, but you have 2" pipe out the collector, right? Trying to remember.... Hmmm, my old brain is overwhelmed lately! lol.
#327
2.25 straight back from the downey 4-1 header, into a 2.25 in/out thrush turbo into 2.25 tail section with an el cheapo 3" square resonator tip.
videos to come.
for those who forgot or don't want to look back that far or for the noobs to the thread I will repost.
don't mind the minor after fire as I don't think carbs like to rev that high and back off so suddenly when not driving. lol.
http://www.youtube.com/watch?v=iyUJCGQx-c0
http://www.youtube.com/watch?v=4oS-6aSzrs4
0-50 ish full throttle
http://www.youtube.com/watch?v=amVJv32DnZM
Drive bys
2:15 2nd gear normal throttle.
3:50 1st to 2nd gear shift at almost full throttle
5:05 pull in to park. Don't mind the dieseling, got to fix the idle shutoff solenoid on this weber.
http://www.youtube.com/watch?v=Tlzj4fWq5Mo
Last video, sorry for the short cutoff was gonna show it sitting at 2000 RPM on the high idle during initial cold startup. Ran outta battery
http://www.youtube.com/watch?v=c5mbwjGO5Gw
videos to come.
for those who forgot or don't want to look back that far or for the noobs to the thread I will repost.
don't mind the minor after fire as I don't think carbs like to rev that high and back off so suddenly when not driving. lol.
http://www.youtube.com/watch?v=iyUJCGQx-c0
http://www.youtube.com/watch?v=4oS-6aSzrs4
0-50 ish full throttle
http://www.youtube.com/watch?v=amVJv32DnZM
Drive bys
2:15 2nd gear normal throttle.
3:50 1st to 2nd gear shift at almost full throttle
5:05 pull in to park. Don't mind the dieseling, got to fix the idle shutoff solenoid on this weber.
http://www.youtube.com/watch?v=Tlzj4fWq5Mo
Last video, sorry for the short cutoff was gonna show it sitting at 2000 RPM on the high idle during initial cold startup. Ran outta battery
http://www.youtube.com/watch?v=c5mbwjGO5Gw
Last edited by xxxtreme22r; Oct 29, 2010 at 09:58 AM.
#328
HAHAHAHAA. .... Great timing, eh? Dang electronics! SOUNDS GREAT, BUD! Hope you get all the kinks worked out as soon as you'd like to. Love that truck! She's a trusty BEAST! LOL.
BTW, was that a driving school car you almost smashed into pulling in the drive????? hahahahaa.
Cool vids, thanks!
Mark
BTW, was that a driving school car you almost smashed into pulling in the drive????? hahahahaa.
Cool vids, thanks!

Mark
#329
Stock exhaust manifold - 2.5" to Cherry Bomb high flow cat - Flowmaster Delta 40 and 2.5" tailpipe. Nice smooth rumble - not too loud when I start it up at 5am some mornings 
Here it is on the dyno:
http://s242.photobucket.com/albums/f...rrent=dyno.mp4

Here it is on the dyno:
http://s242.photobucket.com/albums/f...rrent=dyno.mp4
#330
HAHAHAHAA. .... Great timing, eh? Dang electronics! SOUNDS GREAT, BUD! Hope you get all the kinks worked out as soon as you'd like to. Love that truck! She's a trusty BEAST! LOL.
BTW, was that a driving school car you almost smashed into pulling in the drive????? hahahahaa.
Cool vids, thanks!
Mark
BTW, was that a driving school car you almost smashed into pulling in the drive????? hahahahaa.
Cool vids, thanks!

Mark
#331
Sound sweet, Loco,
And X, NICE, lol... The Pharmacist was probably saying, just minutes later, "MAN, I gotta stop taking all that Xanex before work!... I SWEAR a giant blueberry almost killed me!"
Updated my troubleshooting and oil leaks threads, hehe.
And X, NICE, lol... The Pharmacist was probably saying, just minutes later, "MAN, I gotta stop taking all that Xanex before work!... I SWEAR a giant blueberry almost killed me!"
Updated my troubleshooting and oil leaks threads, hehe.
#333
hey loco where did ya get that cherry bomb high flow cat??? i wonder if its any louder than my magnaflow. ive been itching to either take off my cat or get a smaller high flow. oh and nice to see another truck from Virginia
#337
got the 14" magnaflow..and i'm going to give it time to break in.....but as of right now...i don't like it...sounds like my old '86 22R
i heard a 3rd gen pickup over the weekend though that almost made me crap my pants.
it sounded AHHHHMAAZZZINNNGGGGGGG...had a 3.5" tip in the stock location (like boom tube, was prolly 18" long) very deep and nasty...i LOVED it.
the dude that owns it is my Buddie's ex-girlfriend's uncle...so ima try to go talk to him and find out what he's got on it
or maybe what he doesn't have on it lol
i heard a 3rd gen pickup over the weekend though that almost made me crap my pants.
it sounded AHHHHMAAZZZINNNGGGGGGG...had a 3.5" tip in the stock location (like boom tube, was prolly 18" long) very deep and nasty...i LOVED it.
the dude that owns it is my Buddie's ex-girlfriend's uncle...so ima try to go talk to him and find out what he's got on it
or maybe what he doesn't have on it lol
#338
dude just get cherry bomb extreme. lol im hating my magnaflow copy right now to im keeping it on tell after hunting season and then ima either put straights back on or no cat and cherry bomb extreme. im also ditching my 3.5" tips for black 4" inch tips. this will be exhaust set up number 15 for me i think??? lol
#340
my 3RZ tacoma is running a flowmaster 60 series, my 94 22re is running a home built cat back with 2.5 inch tubing and a flowtech redhots glasspack, it sounds like a deep throaty honda, but more awesome


