I picked up a motor from a junk yard today for my 89 truck. after looking at it I think Im going to replace the front seal along with the valve cover gaskets. On my old motor I just put new timing gear pulleys on, so I will proly replace them to: Ill post some picks in a few days.:wabbit:

 

You might want to replace the rear main seal also .

 

Thats what I am doing now along with swaping out the old wire harnes, and some other small stuff that got broke when it was taken out.

 

Does anybody have a set of headers for sale?

 

I'll have an LCE header for sale in a couple weeks, gonna swap in a 3.4........

 

Ok! let me know. Didn't have any time to work on it today. Mabe tomorow!

 

Got it in and running. Sorry about the pictures the up loader is giving me a hard time. I have a few small things I need to finish up the motor, (1) is the presure switch on the botom of the power stering pump, (2) a black vacume piece that has three places for hoses on the passenger side on the top of the motor . If anybody has the parts I will by them just let me know I dont want to go to Toyota. My zip is 38058 LET ME KNOW!

 

You can block off that pressure switch & the vacuum lines. Does almost nothing at all.

 

I have never seen a pressure switch on a p/s pump, so I figured I could block it Thanks. What is the easiest way to up load pictures?