got it sprayed -now buffing
#6
Contributing Member
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
Damn!
Want to do mine?
You should do a write up with the steps and products used!
My truck is overdue for paint and I would like to do it myself if possible.
Want to do mine?
You should do a write up with the steps and products used!
My truck is overdue for paint and I would like to do it myself if possible.
Last edited by Jay351; 07-24-2007 at 05:28 PM.
Trending Topics
#8
yeah i did mask the handles and windows. I had a black mustang once and did the window trim same black as the car, but this time around i wanted to see how well the satin trim looked. i can always shoot the trim later on. I'm not a real big fan of the dupont but i had some left over and all i had to buy was some activator for $46. picked up quite a bit of dust so the buffing is a must I think maybe this weekend i may paint some silver stripes on the sides.
Jay if you are gonna paint it yourself, i tell ya a while back i bought a Astro Evo 4014 spray gun and it is lvlp instead of hvlp and since you only need 16psi going into the gun you get less overspray and it uses less paint than the hvlp too
highway
Jay if you are gonna paint it yourself, i tell ya a while back i bought a Astro Evo 4014 spray gun and it is lvlp instead of hvlp and since you only need 16psi going into the gun you get less overspray and it uses less paint than the hvlp too
highway
Last edited by highway; 07-24-2007 at 06:42 PM.
#9
Contributing Member
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
I was going to use spray cans I dont have a compresser or anything.
I wonder if I could get anything close to that?
I have spray painted a few things but at certain angles you can see stripes and stuff where more paint has hit the metal
I wonder if I could get anything close to that?
I have spray painted a few things but at certain angles you can see stripes and stuff where more paint has hit the metal
#13
Registered User
Great job. I considered doing my own that way until I ran across this:
http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
I know it's been posted before, but just for giggles, give it a read through.
http://board.moparts.org/ubbthreads/...0&fpart=1&vc=1
I know it's been posted before, but just for giggles, give it a read through.
Thread
Thread Starter
Forum
Replies
Last Post
ashamsuddin
General Vehicle Related Topics (Non Year Related)
17
01-13-2023 03:17 AM
gyroscope7
General Vehicle Related Topics (Non Year Related)
7
09-27-2015 08:39 PM