4runner ifs problem i think please help
#23
Im not tryin to jack the post but... i have just goten home from a little wheeling and now my cv shaft is acting weard. the end that conects to the diff has a lot of in and out play ao much that when i turn it slides out a little and the bolts are smacking the truss . is this a bad cv or is my ifs fu**ed?
Andrew
Andrew
#26
Joined: Jan 2003
Posts: 17,692
Likes: 58
From: Marysville, WA
The diff has a jack shaft that the CV axvle bolts to. A c-clip holds that jack shaft into the diff. If that C-clip comes off or breaks, the CV is still bolted to the jack shaft, but now they move as one unit and it will pull the jack shaft/cv axle assy out of the diff.
#27
ahhh yes i think that is the problum. that shaft has play the jack shaft its pulling everthing out tward the wheel.is this a verry intens job? can i still drive my truck? im so sic of ifs its killing me.every problum i have seems to be with that damm front end. thanks alot
Thread
Thread Starter
Forum
Replies
Last Post
MMA_Alex
86-95 Trucks & 4Runners (Build-Up Section)
25
Apr 18, 2017 05:07 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM






