4cyl locker into v6 third
10-24-2009, 10:23 PM
#1
Registered User
Thread Starter
Join Date: Apr 2009
Location: Redmond, OR
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
4cyl locker into v6 third
So heres my question. I found a detroit locker for a 4 cyl third member, however I have v6 third members. Now the inside of the carrier bearings are different, but are the outside of the carrier bearings the same? I was thinking if they are, I can use 4 cyl carrier bearings on the locker so it will fit my v6 third. You might ask, "why not just buy a v6 detroit third?", well this guy has a NOS detroit locker, local, and I have my front axle apart now so nows the time to do it. I wasnt originally planning on putting in a locker, but it might be fun. Your thoughts are appreciated.
10-24-2009, 11:13 PM
#2
doubt it will work-but dunno for sure
try reading this:
http://home.4x4wire.com/erik/diffs/
and;
http://pirate4x4.com/forum/showthrea...ettled+v6+4cyl
good luck
try reading this:
http://home.4x4wire.com/erik/diffs/
and;
http://pirate4x4.com/forum/showthrea...ettled+v6+4cyl
good luck
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
02-15-2020 06:55 AM
83yotastockR
86-95 Trucks & 4Runners (Build-Up Section)
11
11-10-2015 06:54 AM
Toys4parts
86-95 Trucks & 4Runners (Build-Up Section)
2
09-26-2015 01:56 PM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM
zz_denis
95.5-2004 Tacomas & 96-2002 4Runners
2
09-06-2015 03:43 PM
