AZ Wrenching and Meet & Greet
#1
Registered User
Thread Starter
AZ Wrenching and Meet & Greet
Not sure if this where I should put this, but I'm going to Chandler to work on my truck with lofreqjeff on the weekend of August 8th. We decided since both of us would be down there we could get some other guys from yotatech down there to either help wrench on my truck or maybe have a bbq. We could use some help on my truck since we both don't know exactly how to do some of the stuff. If you are interested just post up and let us know.
Last edited by RedRunner_87; 07-28-2009 at 03:00 PM.
#5
Registered User
Thread Starter
I'm replacing almost all the steering parts. Pitman and Idler Arm, tie-rods and all the ball joints, and installing BJ Spacers as well.
Right now it hates it, I have correded spark plugs and crappy wires, which I will be replacing while Im down there too. Hopefully that will help it out a little. But I'm totally gutless up here, has so much more power down there.
Dang, Jeff was telling how much you know and could possibly help out on. I was trying to do it before it go hot, but had to wait on parts and had to do some family stuff so we had to wait it out till now. Hopefully its not has hot as it has been down there
Dang, Jeff was telling how much you know and could possibly help out on. I was trying to do it before it go hot, but had to wait on parts and had to do some family stuff so we had to wait it out till now. Hopefully its not has hot as it has been down there
#7
Registered User
Thread Starter
Coming up I had to use 3rd a lot for the hills and use 4th a lot on thed freeways but my buddies who have the 3.0/auto say it is a lot worse drivineg with that than the 22re/5-speed. It is going to suck when I get 33x10.50 and I have to wait to regear.
Trending Topics
#10
Registered User
We're gonna be getting started on this tonite if anyone is free to stop by and hang out.
We will be getting started around 3 or 4.
PM me if you are interested - We'll be in Chandler near Dobson and Warner
We will be getting started around 3 or 4.
PM me if you are interested - We'll be in Chandler near Dobson and Warner
#11
Registered User
If it was not such a drive I'd come down and tease you a bit. I'd even drink you beer so you could keep a clear head while you worked. See how nice I am.
Wanna see some pic's.
.
Wanna see some pic's.
.
#12
Registered User
#13
Registered User
Those are the best kind of helpers.
good luck to ya.
From what you said with all that your replacing should not be all that bad. I hope you have been spraying the heck out of the parts with PB Blaster.
Here is a good link to get your front end aligned when your done.
https://www.yotatech.com/forums/f116...ite-up-163432/
.
good luck to ya.
From what you said with all that your replacing should not be all that bad. I hope you have been spraying the heck out of the parts with PB Blaster.
Here is a good link to get your front end aligned when your done.
https://www.yotatech.com/forums/f116...ite-up-163432/
.
Thread
Thread Starter
Forum
Replies
Last Post
Dale Johnston
86-95 Trucks & 4Runners (Build-Up Section)
11
10-31-2015 10:22 PM
hiluxinargentina
86-95 Trucks & 4Runners
3
09-30-2015 05:51 PM