YotaTech Forums
Walkers aftermarket equivalent of the OEM muffler bolted right up to the stock hanger.
Walkers aftermarket equivalent of the OEM muffler bolted right up to the stock hanger.
0 2026/02/05 16:59:12
The last two joints in the 2” piping need clamps. It’s a very simple exhaust with all straight piping starting at the 4 into 2 section and extending all the way to the 45 elbow and turndown p
The last two joints in the 2” piping need clamps. It’s a very simple exhaust with all straight piping starting at the 4 into 2 section and extending all the way to the 45 elbow and turndown p
0 2026/02/05 16:59:08
0 2026/02/05 16:59:04
View from the front
View from the front
0 2026/02/05 16:58:59
Bedside seams cleaned of caulking.
Bedside seams cleaned of caulking.
0 2026/02/04 17:01:49
Filler strip lined top and bottom just curing. Meanwhile All Star Tug ‘o’ War battle takes place in the background.
Filler strip lined top and bottom just curing. Meanwhile All Star Tug ‘o’ War battle takes place in the background.
0 2026/02/04 17:01:45
Capture nuts welded on the bumper for the two front mounts.
Capture nuts welded on the bumper for the two front mounts.
0 2026/02/03 16:51:39
0 2026/02/03 16:51:36
The bracket on the left was fabricated specifically for the filler strip and has a capture nut welded on the underside to facilitate ease of filler strip installation.
The bracket on the left was fabricated specifically for the filler strip and has a capture nut welded on the underside to facilitate ease of filler strip installation.
0 2026/02/03 16:51:33
0 2026/02/03 16:51:30
Front perspective
Front perspective
0 2026/02/02 17:32:44
How the areas look with the bumper and filler strip in place.
How the areas look with the bumper and filler strip in place.
0 2026/02/02 17:32:41
Added piece to each fender to fill the area otherwise occupied by the end caps on the OEM front bumper.
Added piece to each fender to fill the area otherwise occupied by the end caps on the OEM front bumper.
0 2026/02/02 17:32:38
0 2026/02/01 17:05:28
0 2026/02/01 17:05:18
0 2026/02/01 16:59:37
0 2026/02/01 16:59:33
0 2026/01/31 15:29:58
0 2026/01/31 15:29:55
0 2026/01/31 15:29:52
0 2026/01/30 18:52:40
0 2026/01/30 18:52:37
0 2026/01/28 17:21:29
0 2026/01/28 10:02:34
0 2026/01/28 10:02:31
Installed.
Installed.
0 2026/01/27 18:56:59
0 2026/01/27 18:56:56
3D view
3D view
0 2026/01/27 18:56:53
End view
End view
0 2026/01/27 18:56:51
Top view with the back of clutch fork on the left side. The clips have a curly q on one end which fits into a depression in the back side of the fork while the other end wraps around the ear on the clutch collar holding that in place. The clutch bearing (on the right hand side in this pic) is pressed onto the collar with the round face of the bearing facing the engine.
Top view with the back of clutch fork on the left side. The clips have a curly q on one end which fits into a depression in the back side of the fork while the other end wraps around the ear on the clutch collar holding that in place. The clutch bearing (on the right hand side in this pic) is pressed onto the collar with the round face of the bearing facing the engine.
0 2026/01/27 18:56:48
Front view of assembly
Front view of assembly
0 2026/01/27 18:56:44
0 2026/01/27 17:45:47
All bolted up.
All bolted up.
0 2026/01/27 17:45:44
0 2026/01/27 17:45:41
The lift maxed out just clearing the front end.
The lift maxed out just clearing the front end.
0 2026/01/27 17:45:38
New flywheel, clutch and pressure plate installed.
New flywheel, clutch and pressure plate installed.
0 2026/01/27 17:45:34
0 2026/01/26 16:53:00
Cable extension installed.
Cable extension installed.
0 2026/01/25 17:27:06
Simpson nailer on left after being cut in half. Finished cable extension on the right.
Simpson nailer on left after being cut in half. Finished cable extension on the right.
0 2026/01/25 17:27:02
Glamour photo of rear axle with completed brake lines.
Glamour photo of rear axle with completed brake lines.
0 2026/01/25 17:26:58