YotaTech Forums
0 2026/01/23 18:25:13
Support beam on the opposite side along with a 6 x 8 support post. Secondary beams are 4 x 6 for with 2 x 6 purlins every 30”. All hardware and fasteners are from Simpson’s architectural product line.
Support beam on the opposite side along with a 6 x 8 support post. Secondary beams are 4 x 6 for with 2 x 6 purlins every 30”. All hardware and fasteners are from Simpson’s architectural product line.
0 2026/01/23 18:14:29
This is one of the main support beams for the extra roof along with a support post. They’re both 6 x 8 Doug Firs. Had to take a hedge trimmer to the side just to clear out enough creeper to work.
This is one of the main support beams for the extra roof along with a support post. They’re both 6 x 8 Doug Firs. Had to take a hedge trimmer to the side just to clear out enough creeper to work.
0 2026/01/23 18:14:25
0 2026/01/17 02:59:35
0 2026/01/17 02:59:33
0 2026/01/17 02:58:49
0 2026/01/17 02:58:46
0 2026/01/13 02:12:16
0 2026/01/11 17:13:10
0 2026/01/11 16:19:05
0 2026/01/11 16:16:39
0 2026/01/11 16:16:37
0 2026/01/11 16:16:34
Just noticed while installing the rear drive line I forgot to clean and paint the front of the rear axle. That’s done now.
Just noticed while installing the rear drive line I forgot to clean and paint the front of the rear axle. That’s done now.
0 2026/01/11 16:16:30
0 2026/01/11 12:32:53
0 2026/01/11 12:32:45
0 2026/01/11 12:32:35
0 2026/01/11 12:32:21
0 2026/01/10 02:46:55
0 2026/01/10 02:46:50
0 2026/01/09 10:41:52
0 2026/01/08 17:21:21
0 2026/01/06 17:20:38
Loose wires finally contained
Loose wires finally contained
0 2026/01/05 17:28:45
Painted dash
Painted dash
0 2026/01/05 17:28:42
Kind of sort of a driveline photo
Kind of sort of a driveline photo
0 2026/01/05 17:28:38
0 2026/01/04 04:07:10
0 2026/01/02 16:47:15
0 2026/01/02 16:47:11
0 2026/01/02 02:40:56
0 2026/01/01 17:47:24
0 2025/12/30 17:34:05
0 2025/12/30 17:34:01
0 2025/12/30 17:33:58
Looking down at the left hand mounting point. Two bolts on the top and two on the bottom per side.
Looking down at the left hand mounting point. Two bolts on the top and two on the bottom per side.
0 2025/03/30 17:18:58
Side view of bumper C clamped in place
Side view of bumper C clamped in place
0 2025/03/30 17:18:56
Front view of bumper. The bottom of the bracket is the shiny piece of steel beneath the bottom tube. Truck is parked too close to front wall of shop for a good picture.
Front view of bumper. The bottom of the bracket is the shiny piece of steel beneath the bottom tube. Truck is parked too close to front wall of shop for a good picture.
0 2025/03/30 17:18:54
Angled view of bracket.
Angled view of bracket.
0 2025/03/30 17:15:28
View from the front with top two bolts installed in bracket.
View from the front with top two bolts installed in bracket.
0 2025/03/30 17:15:26
View from engine compartment looking at rear mounting bolt and tab.
View from engine compartment looking at rear mounting bolt and tab.
0 2025/03/30 17:15:23