YotaTech Forums
rubber hose to move the headlight forward slightly
rubber hose to move the headlight forward slightly
0 2016/06/07 06:58:13
had to nix the plug on the back for extra room
had to nix the plug on the back for extra room
0 2016/06/07 06:58:15
hopefully where my dual battery tray will go.....note the lowered power steering cooler to the left
hopefully where my dual battery tray will go.....note the lowered power steering cooler to the left
0 2016/06/07 06:58:17
0 2016/06/07 07:03:05
0 2016/06/07 07:03:06
I may put a "Toyota" logo over the flat part of the top, or at least a TEQ Rising sun sticker or something
I may put a "Toyota" logo over the flat part of the top, or at least a TEQ Rising sun sticker or something
0 2016/06/07 07:40:23
Pretty darn tight fit
Pretty darn tight fit
0 2016/06/07 07:40:24
welded 6mm studs to the right (will probably get wingnuts for ease of removal) and countersunk bolts holding it down to the support bracket (shown later)
welded 6mm studs to the right (will probably get wingnuts for ease of removal) and countersunk bolts holding it down to the support bracket (shown later)
0 2016/06/07 07:40:26
You can see why I had to modify the headlight plug and move it forward slightly
You can see why I had to modify the headlight plug and move it forward slightly
0 2016/06/07 07:40:27
You can slightly see the national luna setup with two AMG Mega fuses bolted to the back upright, but I'll try to get some better pictures of it later
You can slightly see the national luna setup with two AMG Mega fuses bolted to the back upright, but I'll try to get some better pictures of it later
0 2016/06/07 07:40:29
support bracket (this was just something I grabbed out of the scrap pile. I didn't do those terrible looking welds, but it was late and it works (and won't be seen)
support bracket (this was just something I grabbed out of the scrap pile. I didn't do those terrible looking welds, but it was late and it works (and won't be seen)
0 2016/06/07 07:40:31
will probably toss a "toyota" logo (from the junkyard) or a rising flag TEQ sticker on the top part just for kicks
will probably toss a "toyota" logo (from the junkyard) or a rising flag TEQ sticker on the top part just for kicks
0 2016/06/07 07:45:02
you can definitely see how tight of a fit it was
you can definitely see how tight of a fit it was
0 2016/06/07 07:45:04
6mm stud to the left, countersunk stainless hardware on the bottom
6mm stud to the left, countersunk stainless hardware on the bottom
0 2016/06/07 07:45:06
now you see why I had to modify the headlight wiring and remove the 1" plug as well as cheat it forward with the rubber hose spacers....TIGHT!
now you see why I had to modify the headlight wiring and remove the 1" plug as well as cheat it forward with the rubber hose spacers....TIGHT!
0 2016/06/07 07:45:07
0 2016/06/07 07:45:09
you can kind of see the National Luna system and Mega fuses bolted to the back upright, but I'll try and get some better pictures later
you can kind of see the National Luna system and Mega fuses bolted to the back upright, but I'll try and get some better pictures later
0 2016/06/07 07:45:10
support bracket (i just grabbed out of the scrap pile at the shop.....it works, just isn't pretty.
support bracket (i just grabbed out of the scrap pile at the shop.....it works, just isn't pretty.
0 2016/06/07 07:45:12
needs a logo or sticker on top
needs a logo or sticker on top
0 2016/06/07 07:49:28
TIGHT fit!
TIGHT fit!
0 2016/06/07 07:49:30
0 2016/06/07 07:49:32
why I had to modify the headlight wiring and cheat it forward
why I had to modify the headlight wiring and cheat it forward
0 2016/06/07 07:49:33
0 2016/06/07 07:49:35
National Luna setup and 2 mega fuses mounted to the back - will get better pictures of that later
National Luna setup and 2 mega fuses mounted to the back - will get better pictures of that later
0 2016/06/07 07:49:36
support bracket (ugly as sin, but I didn't even weld it....just grabbed it out of the scrap bin at the shop)
support bracket (ugly as sin, but I didn't even weld it....just grabbed it out of the scrap bin at the shop)
0 2016/06/07 07:49:38
0 2016/06/07 08:28:30
0 2016/06/07 08:28:55
0 2016/06/07 08:33:07
0 2016/06/08 08:44:34
0 2016/06/08 08:44:41
view from the top. Many of the holes are plugged as each relay takes up 6 positions, but only uses 4. Top right you can see a micro II 35A SPST relay installed. Great little system using Metri-pack
view from the top. Many of the holes are plugged as each relay takes up 6 positions, but only uses 4. Top right you can see a micro II 35A SPST relay installed. Great little system using Metri-pack
0 2016/06/10 07:40:15
Red 12ga will go to a + busbar and leads into the fuses, then to the relays. Black (with red stripe) 12ga will go to a grounding busbar. Colorful spools will be run through the firewall to the switches with other wiring going to the interior.
Red 12ga will go to a + busbar and leads into the fuses, then to the relays. Black (with red stripe) 12ga will go to a grounding busbar. Colorful spools will be run through the firewall to the switches with other wiring going to the interior.
0 2016/06/10 07:40:25
0 2016/06/13 10:27:14
0 2016/06/15 07:28:30
just sticky back LED strips, the kind that you can buy at Home Depot. We have a ton of them laying around the office from old projects. (they're being powered by an extension cord in this shot, but will have to figure out how to get a similar effect with them rigged up to the battery and a switch).
just sticky back LED strips, the kind that you can buy at Home Depot. We have a ton of them laying around the office from old projects. (they're being powered by an extension cord in this shot, but will have to figure out how to get a similar effect with them rigged up to the battery and a switch).
0 2016/06/15 07:28:31
better photo.
better photo.
0 2016/06/15 07:28:32
0 2016/06/15 07:37:48
0 2016/06/15 07:37:49
0 2016/06/16 09:40:49
about to get a facelift
about to get a facelift
0 2016/06/27 12:22:08