YotaTech Forums
0 2025/03/29 16:47:16
0 2025/03/29 16:47:20
View from the engine compartment. The tab on the back of the bracket with the small bolt into the front crossmember seems useless but it was quick and easy so it got installed.
View from the engine compartment. The tab on the back of the bracket with the small bolt into the front crossmember seems useless but it was quick and easy so it got installed.
0 2025/03/30 16:57:40
Here’s the front view of the mount with the two upper bolts installed into the OEM capture nuts on the front cross member.
Here’s the front view of the mount with the two upper bolts installed into the OEM capture nuts on the front cross member.
0 2025/03/30 16:57:43
Angled view of mounting bracket. The two squares on either end look like something Gumby might draw up but they do get hidden by the bumper.
Angled view of mounting bracket. The two squares on either end look like something Gumby might draw up but they do get hidden by the bumper.
0 2025/03/30 16:57:45
Front view of the bumper on the bracket. The bottom of the bracket is barely visible thanks to the shiny cut edge just beneath the bottom tube. The truck’s too close to the front wall of the shop to get a good front photo right now.
Front view of the bumper on the bracket. The bottom of the bracket is barely visible thanks to the shiny cut edge just beneath the bottom tube. The truck’s too close to the front wall of the shop to get a good front photo right now.
0 2025/03/30 16:57:47
Looking down at the mounting points for the bumper to bracket. Two top bolts and two bottom bolts per side.
Looking down at the mounting points for the bumper to bracket. Two top bolts and two bottom bolts per side.
0 2025/03/30 16:57:49
Side view of bumper C clamped in place.
Side view of bumper C clamped in place.
0 2025/03/30 16:57:52
View from engine compartment looking at rear mounting bolt and tab.
View from engine compartment looking at rear mounting bolt and tab.
0 2025/03/30 17:15:23
View from the front with top two bolts installed in bracket.
View from the front with top two bolts installed in bracket.
0 2025/03/30 17:15:26
Angled view of bracket.
Angled view of bracket.
0 2025/03/30 17:15:28
Front view of bumper. The bottom of the bracket is the shiny piece of steel beneath the bottom tube. Truck is parked too close to front wall of shop for a good picture.
Front view of bumper. The bottom of the bracket is the shiny piece of steel beneath the bottom tube. Truck is parked too close to front wall of shop for a good picture.
0 2025/03/30 17:18:54
Side view of bumper C clamped in place
Side view of bumper C clamped in place
0 2025/03/30 17:18:56
Looking down at the left hand mounting point. Two bolts on the top and two on the bottom per side.
Looking down at the left hand mounting point. Two bolts on the top and two on the bottom per side.
0 2025/03/30 17:18:58
0 2025/12/30 17:33:58
0 2025/12/30 17:34:01
0 2025/12/30 17:34:05
0 2026/01/01 17:47:24
0 2026/01/02 02:40:56
0 2026/01/02 16:47:11
0 2026/01/02 16:47:15
0 2026/01/04 04:07:10
Kind of sort of a driveline photo
Kind of sort of a driveline photo
0 2026/01/05 17:28:38
Painted dash
Painted dash
0 2026/01/05 17:28:42
Loose wires finally contained
Loose wires finally contained
0 2026/01/05 17:28:45
0 2026/01/06 17:20:38
0 2026/01/08 17:21:21
0 2026/01/09 10:41:52
0 2026/01/10 02:46:50
0 2026/01/10 02:46:55
0 2026/01/11 12:32:21
0 2026/01/11 12:32:35
0 2026/01/11 12:32:45
0 2026/01/11 12:32:53
Just noticed while installing the rear drive line I forgot to clean and paint the front of the rear axle. That’s done now.
Just noticed while installing the rear drive line I forgot to clean and paint the front of the rear axle. That’s done now.
0 2026/01/11 16:16:30
0 2026/01/11 16:16:34
0 2026/01/11 16:16:37
0 2026/01/11 16:16:39
0 2026/01/11 16:19:05
0 2026/01/11 17:13:10