YotaTech Forums
Heater core back in for good. Had to cut a relief in the mat to make way for the A/C unit but nothing serious. Thanks for looking! Justin
Heater core back in for good. Had to cut a relief in the mat to make way for the A/C unit but nothing serious. Thanks for looking! Justin
0 2019/03/18 11:34:46
Leaving those bell housing access holes sealed over until if or when they are ever needed.
Leaving those bell housing access holes sealed over until if or when they are ever needed.
0 2019/03/18 11:33:03
Cleaned and reinstalled the factory sound mat.
Cleaned and reinstalled the factory sound mat.
0 2019/03/18 11:31:33
I can now finally rebury this wall with components.
I can now finally rebury this wall with components.
0 2019/03/18 11:29:47
After some black paint a mosaic of Dynamat was added to replace the factory jute that was lost.
After some black paint a mosaic of Dynamat was added to replace the factory jute that was lost.
0 2019/03/18 11:28:05
Left side modifiactions now in a coat of sealer and ready for a little black paint to finsh the job.
Left side modifiactions now in a coat of sealer and ready for a little black paint to finsh the job.
0 2019/03/18 11:26:20
Onto the next deal. Thanks for looking! Justin
Onto the next deal. Thanks for looking! Justin
0 2019/03/07 20:24:08
Mocked up again and have the all clear.
Mocked up again and have the all clear.
0 2019/03/07 20:23:13
Capture nut and bolt added. Relief finished.
Capture nut and bolt added. Relief finished.
0 2019/03/07 20:21:11
New profile patch with only a corner bolt to add back in.
New profile patch with only a corner bolt to add back in.
0 2019/03/07 20:19:33
Just have to add a matching profile onto the cover to seal it back up.
Just have to add a matching profile onto the cover to seal it back up.
0 2019/03/07 20:18:27
New section added for the neded header clearance.
New section added for the neded header clearance.
0 2019/03/07 20:17:13
At least the master cylinder/booster cleared. Thank god for small miracles.
At least the master cylinder/booster cleared. Thank god for small miracles.
0 2019/03/07 20:15:40
Another problem this suspension change will fix: the shock hoop will also double as mount for the new steering shaft to work off of.
Another problem this suspension change will fix: the shock hoop will also double as mount for the new steering shaft to work off of.
0 2019/03/07 20:11:26
The hoop kit I bought from a guy who had a change in plans. Well worth the 200 bucks I paid just for the brackets and tabs alone. Anyway A-Arms next... Justin
The hoop kit I bought from a guy who had a change in plans. Well worth the 200 bucks I paid just for the brackets and tabs alone. Anyway A-Arms next... Justin
0 2019/03/05 22:49:53
0 2019/03/05 22:48:16
0 2019/03/05 22:47:17
Its been in the works for a while. I bought the coilovers at least 5 years ago.
Its been in the works for a while. I bought the coilovers at least 5 years ago.
0 2019/03/05 22:45:26
0 2019/03/05 22:41:48
I've been dreaming about this LT kit by Total Chaos for a few years now. Again I wanted to wait until I had the engine at least running but doing this next will solve this issue of modifying the header. The stock suspension was eventually going anyway so I had no intention of cutting the header up to clear it. My application won't be a straight bolt-on as the kit is sold. The kit allows for the use 33 inch tires but I like my 35's and want to stay with that size. The plan is fabricate new
I've been dreaming about this LT kit by Total Chaos for a few years now. Again I wanted to wait until I had the engine at least running but doing this next will solve this issue of modifying the header. The stock suspension was eventually going anyway so I had no intention of cutting the header up to clear it. My application won't be a straight bolt-on as the kit is sold. The kit allows for the use 33 inch tires but I like my 35's and want to stay with that size. The plan is fabricate new
0 2019/03/05 12:13:16
0 2019/03/05 12:12:20
0 2019/03/05 12:08:00
0 2019/03/05 12:06:57
0 2019/03/05 12:06:21
0 2019/03/05 12:05:12
The major problem is this header exit is completely in the way of the upper control arm and Torson bar mounting point not even close to clearing.
The major problem is this header exit is completely in the way of the upper control arm and Torson bar mounting point not even close to clearing.
0 2019/03/05 12:00:56
0 2019/03/05 11:59:41
Will also have to make a supported idler shaft with a few mor U-joints to snake around the header.
Will also have to make a supported idler shaft with a few mor U-joints to snake around the header.
0 2019/03/05 11:57:22
0 2019/03/05 11:55:37
0 2019/03/05 11:54:45
0 2019/03/05 01:17:10
0 2019/03/05 01:15:13
0 2019/03/05 01:13:49
0 2019/03/05 01:12:39
0 2019/03/05 01:11:50
0 2019/03/05 01:11:03
0 2019/03/05 01:09:30
I do have a clearance issue at the bottom of the steering access plate but it will be an easier one to do.
I do have a clearance issue at the bottom of the steering access plate but it will be an easier one to do.
0 2019/03/05 01:07:03
0 2019/03/05 01:06:11
Ample space for the eventual next stage of the system.
Ample space for the eventual next stage of the system.
0 2019/03/05 01:03:47