post SAS Parts.
#1
post SAS Parts.
ok heres what i have left over.. all prices are OBO plus shipping. shipping is coming from 97229. pick up in portland metro, or delivery if between portland OR and Stockton CA off I-5
*Driver side Upper & Lower A Arm, with spindle hub: $80
* complete IFS diff. 4.56 gears: $125
* 4 OME Shocks. N72F(rear) N98(front) 11 months old: $100
* 4Crawler 1" IFS diff Drop spacer with hardware: $15
* 2 Short Side LC coils. $60
my buddy has a bunch of IFS parts as well let me know if you need anything.
*Driver side Upper & Lower A Arm, with spindle hub: $80
* complete IFS diff. 4.56 gears: $125
* 4 OME Shocks. N72F(rear) N98(front) 11 months old: $100
* 4Crawler 1" IFS diff Drop spacer with hardware: $15
* 2 Short Side LC coils. $60
my buddy has a bunch of IFS parts as well let me know if you need anything.
Last edited by Tofer; Aug 19, 2006 at 11:28 PM.
#2
Panhard Bar
I'm interested in the panhard bar.
I'll be ordering a panhard drop from sonoran steel within the week, but don't know when it will be able to go on. (stock one has to go back for core charge)
Pulled from your SAS thread:
is that all dirt on there? (not rust?) i just need it to be in good enough condition to put on my truck for a month or so, and i'll send my bar that steve has already seen.
If all is well, i'll take it. I'm in Fayetteville,AR 72704.
Thanks,
Keith
I'll be ordering a panhard drop from sonoran steel within the week, but don't know when it will be able to go on. (stock one has to go back for core charge)
Pulled from your SAS thread:
is that all dirt on there? (not rust?) i just need it to be in good enough condition to put on my truck for a month or so, and i'll send my bar that steve has already seen.
If all is well, i'll take it. I'm in Fayetteville,AR 72704.
Thanks,
Keith
Last edited by Exeter; Aug 9, 2006 at 11:27 AM.
#4
Originally Posted by Exeter
I'm interested in the panhard bar.
I'll be ordering a panhard drop from sonoran steel within the week, but don't know when it will be able to go on. (stock one has to go back for core charge)
is that all dirt on there? (not rust?) i just need it to be in good enough condition to put on my truck for a month or so, and i'll send my bar that steve has already seen.
If all is well, i'll take it. I'm in Fayetteville,AR 72704.
Thanks,
Keith
I'll be ordering a panhard drop from sonoran steel within the week, but don't know when it will be able to go on. (stock one has to go back for core charge)
is that all dirt on there? (not rust?) i just need it to be in good enough condition to put on my truck for a month or so, and i'll send my bar that steve has already seen.
If all is well, i'll take it. I'm in Fayetteville,AR 72704.
Thanks,
Keith
*edit* DOHH i forgot that the panhard bar is still in my buddys garage. i will pick it up tomorrow after work and get you a shipping quote on friday.
Last edited by Tofer; Aug 9, 2006 at 10:38 PM.
#5
Originally Posted by 95RunnerSR5
ill take the LC springs if you still got em
i must warn you that they seem to have sagged a bit, so wiht BJ spacers it looked like i had a saggy rear end again (at least to me) with out the BJ spacers they would look really good. and they will flex like crazy.
#6
Tofer,
I'm interested in the 4.56 IFS front diff. Is it an ADD or Non ADD diff? What condition is it in? I'm in Eastern Oregon so shipping shouldn't be too bad. Let me know.
Also, I'll take the V6 hub/rotors. I need a new set on the front of my truck.
Thanks,
Doug
I'm interested in the 4.56 IFS front diff. Is it an ADD or Non ADD diff? What condition is it in? I'm in Eastern Oregon so shipping shouldn't be too bad. Let me know.
Also, I'll take the V6 hub/rotors. I need a new set on the front of my truck.
Thanks,
Doug
Last edited by 99SC4Runner; Aug 9, 2006 at 11:58 PM.
#7
its out of my 94 so it has ADD. it is in good condition. i never was really hard on the truck. it weighs quite a bit. i;ll get a shipping quote for you but i almost wonder if it would be cheaper to drive... i can probablly meet you half way if you get me some gas moeny.
Trending Topics
#8
getitng shipping quotes for everyone today
#9
everyone has PMs...
#11
heres how it looked wiht BJ spacer and the LC coils.

#12
ok looks like the diff and the LC coils are still for sale... please let me know if anyone wants this stuff.. all prices are OBO. i need this stuff gone. i will be in alaska for a week wiht limited internet. but if you want something PM me and let me know. my paypal email is Chris(at)eakland.net
#13
bump... anyone need LC coils? front diff? anything?
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
Apr 11, 2024 04:39 PM





