Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

3.0 wont stay on

Thread Tools
 
Search this Thread
 
Old Apr 22, 2006 | 10:21 AM
  #1  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
3.0 wont stay on

please help guys, my truck will start up fine but has a spuratic idle, jumps up and down a bit, well after driving it for a bit and it's warm. when i come to a stop it shuts off, when i start it it jumps to 1 and1/2 rpm them dies....what do you guys think, spark plug? fuel filter?
Reply
Old Apr 22, 2006 | 10:48 AM
  #2  
celica's Avatar
Registered User
 
Joined: Aug 2005
Posts: 1,769
Likes: 1
Vacuum leak
Reply
Old Apr 22, 2006 | 11:22 AM
  #3  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
really???? where is the vacume
Reply
Old Apr 22, 2006 | 11:28 AM
  #4  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
you mean somewhere along the intake, as far as driveing the power is just a little bit less than normal, but when at idle it shuts off...
Reply
Old Apr 22, 2006 | 12:19 PM
  #5  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
anyone have ideas??? i really need a bit of help
Reply
Old Apr 22, 2006 | 12:29 PM
  #6  
regularguy412's Avatar
Registered User
 
Joined: Feb 2006
Posts: 490
Likes: 2
Unfortunately if it is a vacuum leak, it could be among any of the 3.0Million vacuum hoses in the engine bay. However if it's dying that readily, it's probably one of the larger hoses. Check the brake booster hose, and anywhere along the main air inlet from the air filter box to the resonator to the throttle body. One of the three parts on my air inlet tubing was cracked and couldn't get it to idle properly.

Might try spraying a little brake clean around some of the lines and see if the idle changes. TAKE CAUTION when doing this. The brake clean is flammable. I would advise doing this when the engine has cooled down a bit, but not overnight cold.

Mike in AR
Reply
Old Apr 22, 2006 | 01:36 PM
  #7  
celica's Avatar
Registered User
 
Joined: Aug 2005
Posts: 1,769
Likes: 1
Originally Posted by funrunner91
really???? where is the vacume
:pat:
Reply
Old Apr 22, 2006 | 02:49 PM
  #8  
rpeAMP's Avatar
Registered User
 
Joined: Jul 2002
Posts: 419
Likes: 0
From: San Antonio, TX
Any hissing going on under the hood? That's a sure sign of a vaccuum leak. What about the throttle body? Is it at least marginally clean?
Reply
Old Apr 22, 2006 | 04:11 PM
  #9  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
no hissing going on, i would love to post a viedo if i knew how. i could post pictures??? i'm cleaning the throdle body right now and putting in new spark plugs..due to the jumpy idel....one thing i did notice is this....this morningi went to the muffler shop to put the magnaflows in drove, the truck drove like crap there, on the way home after being warm the engine cuts out when i let go of the gas or come to a stop.....can photobucket post viedo????
Reply
Old Apr 22, 2006 | 05:40 PM
  #10  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
throdle body cleaned with cleaner and hoses checked, drivers side 3 spark plugs changed, it still sounds like a old ford truck. it does feel a little better. i do hear a hissing noise now that i've had it running in the garage. i have not kept it runing long enough to get warm. it's got a smokey exaust, light black/gray smoke (the cat and muffler is new ) i changed the oil and the old oil looked good. there is no leak around the engine or tranny, tomarrow i will xchange the 3 passanger side spark plugs then if i'm still stumped and advise here does not work i'm takeing it to the shop. thanks so any info
Reply
Old Apr 23, 2006 | 01:56 PM
  #11  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
hey guys, well i took a viedo and i'm just waiting for photo bucket to upload it. you will be able to hear the truck run off beat, engine is pretty load but all stock, no fan shroud so you can't really hear much. the intake is hissing, i poped off a vacuum hose to hear what that sounds like. so after that i can hear nothing but intake so i dont think i have a vacuum leak. viedo will be up in a few moments
Reply
Old Apr 23, 2006 | 03:32 PM
  #12  
91_4x4runner's Avatar
Contributing Member
 
Joined: Dec 2005
Posts: 1,072
Likes: 0
From: San Antonio, TX
I didn't know you could upload vids to photobucket... cool.
Reply
Old Apr 25, 2006 | 10:39 AM
  #13  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
ok photobucket wont upload my vid, i took my rig to the toyota dealership today and they told me it's a Mass air flow sensor and intake elbow. their mass air flow sensor is $700+ ya right......anyone here in CA have a MAF and intake elbow???????
Reply
Old Apr 25, 2006 | 10:49 AM
  #14  
Jeffires's Avatar
Registered User
 
Joined: Aug 2004
Posts: 687
Likes: 0
From: New Orleans, Louisiana
NAPA has a reman for $180 with 90 day warranty
Reply
Old Apr 25, 2006 | 10:52 AM
  #15  
dwh91102's Avatar
Contributing Member
 
Joined: Nov 2004
Posts: 1,285
Likes: 0
From: Aurora, Indiana
try the junk yard first, the air flow meters don't go bad that often, and its worth a shot
Reply
Old Apr 25, 2006 | 05:07 PM
  #16  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
hey i found a yotatecher in thousand oaks with everything i need, i'm on my way, man it pays to search
Reply
Old Apr 26, 2006 | 02:02 PM
  #17  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
oh my gosh, this dude had everything, i went to his house for a mass air flow meter and intake elbow for $100....a very fair price, this dude gave me the whole air box and everything. so i gave everything i had on me $120....i thought it was well worth it. he has everything you could imagine for toyota trucks. a huge house, with lots of land and under every tree was a land crusier jeep.....yes under every freaking tree this guy is the best for parts and a very fair price. he had a brand new f250 desil that ran on vegi oil.....50 cents per gallon....dude let me find his id and i will post it, he is the nicest person you will ever meet....
Reply
Old Apr 26, 2006 | 02:10 PM
  #18  
funrunner91's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 339
Likes: 0
From: Orange, CA
So here is his ID, I’m sure he wont mind since he's tiring to get rid of a whole lot of stuff......findley.........this guy is so nice and very prompt, please don’t be rude to him or try to get a CV axel for $15 cause that just pathetic…haha it was a story he shared with me. I just though it was so funny and sad someone tried to pull that.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tobylab
General Vehicle Related Topics (Non Year Related)
6
Jan 18, 2016 07:06 PM
fountain
86-95 Trucks & 4Runners
5
Dec 31, 2015 06:08 AM
jb451
3.4 Swaps
3
Aug 31, 2015 06:23 PM
ViperTT
86-95 Trucks & 4Runners
8
Aug 14, 2015 05:27 AM
tobylab
86-95 Trucks & 4Runners
0
Jul 12, 2015 12:53 PM




All times are GMT -8. The time now is 11:24 PM.