Maintenance & Repair Archives Note: This section will be merged in with the other tech areas soon, and is now closed

2nd time HG BLOWN, buy NEW motor @ only 130k or rebuild?

 
Thread Tools
 
Search this Thread
 
Old Apr 29, 2005 | 04:11 PM
  #1  
silver94's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 10
Likes: 0
From: nor-cal moving to so. cal
2nd time HG BLOWN, buy NEW motor @ only 130k or rebuild?

hey everyone...
though i read all your posts alot ( thanks ) i dont usually log in..
anyway.. my friggin' head gasket blew on me .. i know usually does on the 3.0
its all ready had the factory recall done once.. they WILL NOT do it again, and the STEALership wants to charge me $2100.00 to do repair ( including valve adjust ) .. i figure for about another $1500.00 or so.. i could have a whole new jasper motor instead of just fixing the top end in this one with 132,xxx.. i would do the work myself, but
1) its my daily driver
2)i live in an apartment and DONT have my own garage right now, arrggg.
3)not much time.

.. so what do you guys think? spend a little extra and get a new powerplant,
or just do the top end on the block that has all ready blown two HG's ?

( not doing a 3.4 swap, too much $$ right now )

thanks for any ideas..
Old Apr 29, 2005 | 05:27 PM
  #2  
wiseguymmiv's Avatar
Registered User
 
Joined: Mar 2004
Posts: 234
Likes: 0
From: good ole Mississippi
What year is your Runner?
Old Apr 29, 2005 | 05:29 PM
  #3  
silver94's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 10
Likes: 0
From: nor-cal moving to so. cal
oh ya.. 1994 4runner, V6 3.0.. BLOWN HG.. only 130,xxx she was still just a baby..
Old Apr 29, 2005 | 05:39 PM
  #4  
DudeBud's Avatar
Contributing Member
 
Joined: Mar 2005
Posts: 1,871
Likes: 0
From: WA ,monroe
Originally Posted by silver94
oh ya.. 1994 4runner, V6 3.0.. BLOWN HG.. only 130,xxx she was still just a baby..
still might beable to get the deal to do it if they did a crapy job

Last edited by DudeBud; Apr 29, 2005 at 05:40 PM.
Old Apr 29, 2005 | 06:01 PM
  #5  
Bigblock's Avatar
Registered User
 
Joined: Dec 2004
Posts: 1,032
Likes: 0
From: So MS
Maybe;if The Service Manager Is You'r Mom.
Old Apr 29, 2005 | 06:29 PM
  #6  
DudeBud's Avatar
Contributing Member
 
Joined: Mar 2005
Posts: 1,871
Likes: 0
From: WA ,monroe
or maybe if you can prove they did not do it in the frist place. dont laugh it happens
Old Apr 29, 2005 | 07:02 PM
  #7  
waskillywabbit's Avatar
Banned
iTrader: (-1)
 
Joined: Jul 2003
Posts: 3
Likes: 20
You've tried being REACTIVE twice...fixing it after it breaks...now be PROACTIVE and just replace it and get a new engine...or possilby even upgrade to a 3.4.

My pennies.

Old Apr 29, 2005 | 09:36 PM
  #8  
4Crawler's Avatar
Contributing Member
20 Year Member
iTrader: (3)
 
Joined: Jun 2002
Posts: 10,821
Likes: 34
From: SF Bay Area, CA
If you want to keep the engine, the crucial thing is to find our WHY the head gasket blew and fix the underlying cause of the HG failure. I lost a few on my 22RE and ultimately traced the problem to a partially clogged radiator. Would only overheat in very hot weather and driving at high engine RPMs. If the temps were below about 80F or the engine RPMs below about 3000, it would run perfectly cool. But push it a little and it would overheat just a little. Never got into the red zone, just a needle width or two higher than normal on the gauge. That was enough to warp the head just a little to cause a slight HG leak. After fixing the cooling system and putting on a new (not rebuilt) head, it has run nice and cool for the last 6 years.
Old May 11, 2005 | 12:52 PM
  #9  
silver94's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 10
Likes: 0
From: nor-cal moving to so. cal
thanks everyone.
i almost bought a turbo subaru outback..
but decided to keep the runner and eat the cost to fix
my truck..
full valve job, new gasket, studs, etc.., o2 sensors, and a flex a lite...
summer is here, and i need my 4x4... !!
i'll keep you posted..
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Team420
95.5-2004 Tacomas & 96-2002 4Runners
4
Jan 12, 2021 04:57 PM
duckhead
86-95 Trucks & 4Runners (Build-Up Section)
170
Nov 13, 2017 06:07 AM
Alaskan91
Newbie Tech Section
4
Sep 21, 2015 04:39 AM
infinityisfive
Other Makes Cars/Trucks
0
Jun 16, 2015 06:51 PM




All times are GMT -8. The time now is 02:06 PM.