Notices
Vehicles - Trailers (Complete) Have a whole vehicle to sell? Put it here

FS[SouthEast]: 86 Truck Project with all the parts

Thread Tools
 
Search this Thread
 
Old Mar 24, 2025 | 06:12 PM
  #1  
concordyota's Avatar
Thread Starter
Registered User
 
Joined: Aug 2023
Posts: 10
Likes: 2
86 Truck Project with all the parts

86 IFS Carb truck
Wheels were refinished and coated
New 32" BFG
New never installed:
LCE Long tub Header
Weber carb (cant remember the size but can look, was sized to header with LCE)
MANY LCE new parts
EGR delete kit (I know its not called that but I cant remember what its called)
All the plates with the delete kit included
New fan
Clutch for fan
and more and more
Other things:
Have windshield
two sets of rear windows, both sliders, one tinted
Flat bed - angle iron and PT lumber
Dash cover carpet
Rear drums rebuilt zero miles
New pitman arm zero miles
Poly mounts zero miles (removed body mount when started project)
Hubs rebuilt
Homemade wench bumper (not me)
new (used) front fenders, rust free
two additional factory exhaust manifolds
working carb came off of truck - not sure of brand but ran well with it
Extra head - had heli's installed at one point so not sure if good without machine work
All AC parts (i think 90% sure here)
Now for what is missing or needed:
Interior is out and dash is gone
I do have some of the parts including good glove box - Blue interior
Door cards are Ok, but not 100%
Windows roll and are in good shape and work
Doors and locks work and are tight
Small rust spot as pictured in driver floor pan - No other rust anywhere
Head on motor had heli coils put by PO on exhaust and intake side and will not take new bolts
Inside of motor looks clean
Motor was 'rebuilt' by PO - ran great before tear down
New clutch by PO
Truck ran great and drove ok, torsion bars were cranked up and body lift which I corrected both before parking and starting on

As all failed project owners say I have a million dollars in the project but I am open to offers for all of it. I would prefer not to part out and make someone a deal on the entire thing. Its been kept in a garage since I started a year ago when I drove it in the garage. Kids are pulling me in 19 different directions and this truck is suffering for it. Make me an offer that is realistic and come get it.

I have a much longer list of items that was done in the last three years to the truck as well if you are serious and I can find it. I have been holding out for a donor truck for the interior, bought one last year but my daughter took it before I could pull the interior so here we are. I have many other pics I can send but cant load the proper file type here.














Reply
Old Mar 25, 2025 | 02:06 AM
  #2  
Rockjump2fish's Avatar
Registered User
 
Joined: Aug 2013
Posts: 13
Likes: 0
What are you asking?

Hellothere how much are you asking?
Originally Posted by concordyota
86 IFS Carb truck
Wheels were refinished and coated
New 32" BFG
New never installed:
LCE Long tub Header
Weber carb (cant remember the size but can look, was sized to header with LCE)
MANY LCE new parts
EGR delete kit (I know its not called that but I cant remember what its called)
All the plates with the delete kit included
New fan
Clutch for fan
and more and more
Other things:
Have windshield
two sets of rear windows, both sliders, one tinted
Flat bed - angle iron and PT lumber
Dash cover carpet
Rear drums rebuilt zero miles
New pitman arm zero miles
Poly mounts zero miles (removed body mount when started project)
Hubs rebuilt
Homemade wench bumper (not me)
new (used) front fenders, rust free
two additional factory exhaust manifolds
working carb came off of truck - not sure of brand but ran well with it
Extra head - had heli's installed at one point so not sure if good without machine work
All AC parts (i think 90% sure here)
Now for what is missing or needed:
Interior is out and dash is gone
I do have some of the parts including good glove box - Blue interior
Door cards are Ok, but not 100%
Windows roll and are in good shape and work
Doors and locks work and are tight
Small rust spot as pictured in driver floor pan - No other rust anywhere
Head on motor had heli coils put by PO on exhaust and intake side and will not take new bolts
Inside of motor looks clean
Motor was 'rebuilt' by PO - ran great before tear down
New clutch by PO
Truck ran great and drove ok, torsion bars were cranked up and body lift which I corrected both before parking and starting on

As all failed project owners say I have a million dollars in the project but I am open to offers for all of it. I would prefer not to part out and make someone a deal on the entire thing. Its been kept in a garage since I started a year ago when I drove it in the garage. Kids are pulling me in 19 different directions and this truck is suffering for it. Make me an offer that is realistic and come get it.

I have a much longer list of items that was done in the last three years to the truck as well if you are serious and I can find it. I have been holding out for a donor truck for the interior, bought one last year but my daughter took it before I could pull the interior so here we are. I have many other pics I can send but cant load the proper file type here.
Reply
Old Mar 25, 2025 | 04:54 AM
  #3  
concordyota's Avatar
Thread Starter
Registered User
 
Joined: Aug 2023
Posts: 10
Likes: 2
Not sure what the market is anymore honestly. Somewhere around 3k would be where I want to be.
Reply
Old Mar 26, 2025 | 04:31 PM
  #4  
Melrose 4r's Avatar
Registered User
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2017
Posts: 2,436
Likes: 965
From: 02176
Where is it located??
Reply
Old Mar 26, 2025 | 04:34 PM
  #5  
concordyota's Avatar
Thread Starter
Registered User
 
Joined: Aug 2023
Posts: 10
Likes: 2
GA... South of Atlanta
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ElRob
Pre 84 Trucks (Build-Up Section)
29
Jan 23, 2020 12:42 PM
88rnr
The Classifieds GraveYard
48
May 10, 2013 09:23 AM
MHST Guy
86-95 Trucks & 4Runners
3
Oct 23, 2008 12:38 PM
sefus
The Classifieds GraveYard
7
Feb 22, 2008 10:17 AM




All times are GMT -8. The time now is 09:57 PM.