turbo for 3.0L v6
#2
I don't have any answer for you, but I see your from Indiana.
Where exactly is Connersville? I'm in West Lafayette, actually I'm goin off-roading tommorrow at Attica, you're more than welcome to come if you'd like.
Where exactly is Connersville? I'm in West Lafayette, actually I'm goin off-roading tommorrow at Attica, you're more than welcome to come if you'd like.
#4
To answer you question, no. There is no company that makes any turbo, or even supercharger for the 3.0 L v-6. I know that there was a guy on the pirate forum that turboed his truck. It takes a lot of money and time. Probably just as much time and money as it would to buy a used 3.4 out of a tacoma and retrofit it into your truck. You've got 190 hp naturally aspirated which is MUCH better than forced induction and if you really want you can supercharge the 3.4 to get even more power.
If you really want to get more power out of you 3.0 and you're willing to spend a good sum of money, you're better off just doing the 3.4 swap.
If you really want to get more power out of you 3.0 and you're willing to spend a good sum of money, you're better off just doing the 3.4 swap.
#7
It has been talked about on here before. Awesome setup
https://www.yotatech.com/forums/show...ight=3.0+turbo
https://www.yotatech.com/forums/show...ight=3.0+turbo
Trending Topics
#8
I just saw a guy with a turbo 3.0 this weekend out at the Hammers. He had an exo caged pickup with a turbo from a Grand National. He said it ran pretty nice, and not too hot. I have no idea what it took to get it in there, but it looked pretty involved.Lots of custom piping for the intercooler plumbing.
#9
Originally Posted by Toyo_Runner96
I don't have any answer for you, but I see your from Indiana.
Where exactly is Connersville? I'm in West Lafayette, actually I'm goin off-roading tommorrow at Attica, you're more than welcome to come if you'd like.
Where exactly is Connersville? I'm in West Lafayette, actually I'm goin off-roading tommorrow at Attica, you're more than welcome to come if you'd like.
connersville is about 15 mins.. from haspen acres if u know where that is!!! about 45 mins. from cincinnati,Ohio..
Josh
#10
That swap cost $700. here's the link
http://www.pirate4x4.com/forum/showt...ight=3vz+turbo
http://www.pirate4x4.com/forum/showt...ight=3vz+turbo
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
Feb 15, 2020 06:55 AM
smilen724
86-95 Trucks & 4Runners (Build-Up Section)
13
Nov 8, 2015 04:11 PM




