Joined: Jan 2019

Posts: 9

Likes: 0

just recently did head gasket water. Pump and timing chain on my 86 runner 22re got it all in right tighten valves go to crank it and cranks but no start noticed my fuel pump relay keeps blowing wat could be problem

Joined: Jun 2013

Posts: 3,112

Likes: 582

From: Portland, Oregon, USA

Joined: Jan 2019

Posts: 9

Likes: 0

It’s a gold relay behind driver side kick panel under the dash but it seems to keep blowing and the fuel pump stops working any ideas of what to do

Joined: Aug 2011

Posts: 42

Likes: 0

From: South Florida

Might be a dumb question but do you have your intake all the way on ? On my 93 i did the exact same job and was trying to start my truck without the intake hooked up to the throttle body. I won’t start like that due to the sensor in the intake telling the fuel pump to kick on. Also make sure your timed correctly and not 180 off

Joined: Mar 2019

Posts: 4

Likes: 0

Joined: Aug 2011

Posts: 42

Likes: 0

From: South Florida

I mainly meant the airboot that runs along the radiator that goes from the throttle body to the actual air box where the air filter is. Make sure that’s on or else the fuel pump won’t kick on besides the little bit of fuel it shoots in the manifold for a cold start

Joined: Dec 2018

Posts: 53

Likes: 8

From: Valley Mills, Texas