Wanting to lift my truck alittle bit and fit 33's. Any suggestions on brands or kits?

 

there really aren't any "cheap" leafs that are worth buying. expect good leaf packs to cost around $150/side, excluding the bushings kit and shackles if you need those too. t-bar crank is free, just remember to get alignment after to correct camber.

one of the top brands for leafs across the globe is the ARB/Old Man Emu Dakar leaf springs. They come in medium and heavy duty. HD is more for fully-loaded safari rig and is quite stiff I hear. Medium ends up settling to lift about 2" over stock height. On my 93, it was quite a big jump initially, when compared to saggy-butt it was previous, but settled nicely. Ended up at 22.5" in rear (center axle to bottom of fender) with stock shackles.

front end you can do t-bar crank of stock t-bars, stiffer/thicker aftermarket t-bars, bj-spacers, and bracket lifts to gain height. generally you have around 0-3" you can adjust with t-bars and/or bj-spacers. bracket lifts are a fixed 4", but you can still play with t-bars after.

research here on YT in the IFS lift guide.

 

Alright Thanks for the quick reply and a lot of valuable info man. I'll keep everyone updated when I get a plan!