Newbie Tech Section Often asked technical questions can be asked here
Sponsored by:
Sponsored by: CARiD

wheel bearing PN

Thread Tools
 
Search this Thread
 
Old Dec 7, 2012 | 05:47 PM
  #1  
Dreidel's Avatar
Thread Starter
Registered User
 
Joined: Mar 2012
Posts: 387
Likes: 1
From: Topeka, Kansas
wheel bearing PN

ok so i am have a chance to get some very cheap timken wheel bearings and all i need is the pn numbers off the bearing now this is proving to be a problem and everywhere i find the bearings it doesnt give numbers now i found a thread on here that had some bearing numbers but they were for a 93 2wd 4runner and i need them for a 83 toyota 4wd axle any help would be very appreciated i have looked all over and cannot find these

sorry if this is in the wrong spot

:EDIT: i forgot to say that i need the ones for the front axle however knowing the #s for the rear is good to just in case

Last edited by Dreidel; Dec 8, 2012 at 06:51 PM.
Reply
Old Dec 8, 2012 | 06:27 AM
  #2  
MudHippy's Avatar
Registered User
 
Joined: Jan 2007
Posts: 6,106
Likes: 27
Toyota part # 90363-40020-77
Timken part # RW-130-R

Last edited by MudHippy; Dec 11, 2012 at 10:27 AM.
Reply
Old Dec 8, 2012 | 08:57 AM
  #3  
wyoming9's Avatar
Registered User
iTrader: (1)
 
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
Red face

Is that part # for the rear or front bearings and the front would be two different bearings not.
Reply
Old Dec 8, 2012 | 12:39 PM
  #4  
MudHippy's Avatar
Registered User
 
Joined: Jan 2007
Posts: 6,106
Likes: 27
Rear.
Reply
Old Dec 11, 2012 | 06:05 AM
  #5  
Dreidel's Avatar
Thread Starter
Registered User
 
Joined: Mar 2012
Posts: 387
Likes: 1
From: Topeka, Kansas
ok so i found the part numbers here
[quote]
Timken#------Autozone#-----Autozone$
JLM104948-----000977---------4.99
JLM104910-----172544---------12.99
JLM102949------N/A
JLM102910------N/A
Set 47-----------199121--------16.99

And of course set 47 is the N/A bearing and race.
[quote]
(thank you scottm from ih8mud)
i do believe according to timkens catalog that all fr
ont bearings posted in this thread will work for all 4wd trucks and pickups from 79-95 im not sure on the rears but i will try to find out timkens catalog is some pretty dull reading

Last edited by Dreidel; Dec 11, 2012 at 06:06 AM.
Reply
Old Dec 11, 2012 | 10:23 AM
  #6  
MudHippy's Avatar
Registered User
 
Joined: Jan 2007
Posts: 6,106
Likes: 27
Timken #
JLM104948 Front Inner Cone
JLM104910 Front Inner Cup
JLM102949 Front Outer Cone
JLM102910 Front Outer Cup
Set 47 Front Outer Cup & Cone
RW-130-R Rear

Toyota #
90368-49084-77 Front Inner Cup & Cone
90080-36067 Front Outer Cup & Cone
90363-40020-77 Rear

Cone = Inner race + roller bearings + cage(these parts are sometimes refered to as just the Bearing)
Cup = Outer race(this part is sometimes refered to as just the Race)
Cup & Cone = Bearing set(all of said parts, not just the roller bearings)


Next time be more specific with your question. I knew all of those part numbers, and then some. Including the fact that the fronts will fit all Toyota 4WD Trucks, 4Runners, T100s, and many Land Cruisers from 79-98.
http://www.toyotapartszone.com/Page_...er=90368-49084

And the rear will fit 83-95 4WD Trucks, 83-00 4Runners, 92-98 T100s, and 95-98 Tacomas.
http://www.toyotapartszone.com/Page_...er=90363-40020

Last edited by MudHippy; Dec 11, 2012 at 02:19 PM.
Reply
Old Dec 11, 2012 | 11:19 AM
  #7  
Dreidel's Avatar
Thread Starter
Registered User
 
Joined: Mar 2012
Posts: 387
Likes: 1
From: Topeka, Kansas
what do you mean be more specific
Reply
Old Dec 11, 2012 | 12:59 PM
  #8  
MudHippy's Avatar
Registered User
 
Joined: Jan 2007
Posts: 6,106
Likes: 27
What do you mean, what do I mean?

Look at my posts, then look at yours.

Who's more specific?

Who could have been?
Reply
Old Dec 11, 2012 | 04:35 PM
  #9  
Dreidel's Avatar
Thread Starter
Registered User
 
Joined: Mar 2012
Posts: 387
Likes: 1
From: Topeka, Kansas
you told me to have my QUESTION be more specific i said i found p# for a 2wd but i needed the parts for a 4wd sorry for not telling and was asking for the numbers which you nicly provided and i thank you for that and realized i forgot to say i need the front wheel bearings
as for my other post that was providing info and not a QUESTIONsorry i forgot to add that the set 47 is the outers and the other two are inners. sorry for not saying set. if im going to replace a bearing im going to replace the race too so imo it really doesnt matter to me weather the race and bearing is specified
if somebody cant tell the difference between the race and the bearing than they should probably be paying somebody else to replace the bearing sets
so in telling me to be more specific are you telling me to label which is cup and cone or inners and outers
oh and next time could you please just make a suggestion to label my bearings so people know instead of stating "be more specific" and ending it at that because i had that info i was just in a hurry at school when i wrote that post
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigjstang
86-95 Trucks & 4Runners
21
Jun 2, 2025 03:56 PM
glowz825
95.5-2004 Tacomas & 96-2002 4Runners
5
Jan 25, 2022 09:28 AM
Shaun Crystal Gomban
Product Reviews
0
Aug 2, 2015 08:00 PM
RBK
Newbie Tech Section
5
Aug 1, 2015 01:55 PM
PlayAwhile
86-95 Trucks & 4Runners
5
Jul 20, 2015 11:36 AM




All times are GMT -8. The time now is 12:58 AM.