89 1st gen 4runner body and frame. Former S&N employee's build.

Included:
- bobbed removable canopy (it's 1/2 long), side glass, but no rear glass.
- Slick 2" integrated roll cage, tied into rock sliders and frame
- Custom removable transmission / case slider / 4-link rock slider. Bolts to custom frame inserts welded in.
- Comes with 2 doors that have glass. One is installed (removable pins), the other is not installed yet.
- Air or coilover shock hoops integrated into roll cage and frame.
- Bobbed body at the tail, professionally done.
- Rattle-canned army green paint for protection
- inexpensive bed coating on interior.
- No rear door.

Located in Washington State, email for details. No tires or axles.

Note:
No drivetrain, axles, shocks, coilovers, tires or anything besides the body, frame, canopy and other elements listed above. This is a rare opportunity to snag a 4-link ready, bobbed (well), caged (well and in 2"!) 1st gen 4runner.



Frankly I hate myself for selling it. I will for a long time hate the fact that I'm selling it. Reality is making me. Therefore, I beg you to build this into the truck that it should be. A light, narrow and awesome 1st gen runner.

Signed Title of the last owner included. First Cash only. I really prefer this goes to someone who will build it and love it. Send questions to boxxerace @ hotmail.com or post them up here.

$1,100. Will require a trailer or a box truck with a lift-gate to move. Thanks to the skid plate, it's mighty slippery underneath.

 

Another (old) photo showing the roll cage in the back. Designed for passengers in the rear seats (I have kids).

Hole in back is for the fuel cell access and rear air shocks. (not included).

 

Looks like a great base to start a project off of.
Good luck...

 

This is setup for a toyota motor with a dana 300. Obviously it can be made to fit most anything.

 

Read about the build-up thread here: https://www.yotatech.com/forums/f198...thread-118943/

 

Here are some more photos for you to ponder over:











Note: I remove the piece of cage over drivers head. I'm taller than the original owner. Move inboard about 2" and it's perfect. Original tube included.

 

Bump for you sir, this has alot of potential.

 

Thanks Mark!

Make some offers, trades, something I can actually use!

 

I got to get this thing moving. New Price $ 925.00.

You can always just take a look at it! boxxerace @ hotmail.com

Thanks!

 

 

this thing is awesome, great price

 

i wish i wasn't on the opposite coast because i would be more than happy to take this off your hands. drag it to maine and i'll take it!

 

If gas were free, I'd love to visit your state! Cheers!

 

Still got it? Live 45 min from portland

 

Yes sir, I do!

Shoot me the best way to contact you. Thanks!

 

1st Gen Toyota runner with a sweet two inch cage and all setup for 4-link suspension.... AND YOU DON'T WANT IT?!?

For sale, but only for a short time now. Consider how rare these are getting and how cool of a rig this will make.

Contact me ;P boxxerace (at) hotmail.com

 

Update, Update, Update, new price! Make this an inexpensive and RAD Christmas present for yourself.

$700.00 in cash and this link-ready, bobbed, caged and 1st gen Toyota is yours. I really want to see this go to a good home and get built!

I am near Boeing in Everett, WA. Contact me asap!

 

4 linked 1st gen Toyota. Someone has to like Toyota's, right?

 

Nice rig I would pick it up but I'm in Texas

 

Texas is not that far right? Besides, the weather in Washington is just lovely this time of year!