Newbie Tech Section Often asked technical questions can be asked here
Sponsored by:
Sponsored by: CARiD

Tried to raise my idle and nothing happened

Thread Tools
 
Search this Thread
 
Old Jul 31, 2012 | 07:34 PM
  #1  
Dutter's Avatar
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 82
Likes: 0
From: paradise CA
Tried to raise my idle and nothing happened

Hey i just got my first yota its got the 22re on 33s 4x4 of course and its a 91, And im use to fords and chevys so ill be one this site alot. But my brother tried to raise my idol with the flat head screw and nothing happened, dos this mean i have a leak in the pile of hoses and will that effect smog
Reply
Old Jul 31, 2012 | 07:45 PM
  #2  
dropzone's Avatar
Fossilized
iTrader: (6)
 
Joined: Oct 2005
Posts: 19,771
Likes: 456
From: PNW
Welcome to yotatech. We have a bunch of knowledgeable members.
Here is a link to where u can down load the factory service manual
http://ncttora.com/fsm/index.html
Reply
Old Jul 31, 2012 | 08:11 PM
  #3  
Dutter's Avatar
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 82
Likes: 0
From: paradise CA
Thanks,, yeah i couldnt find a 91 pickup in there,, there was a 93
Reply
Old Jul 31, 2012 | 08:23 PM
  #4  
4Crawler's Avatar
Contributing Member
20 Year Member
iTrader: (3)
 
Joined: Jun 2002
Posts: 10,821
Likes: 34
From: SF Bay Area, CA
Originally Posted by Dutter
Thanks,, yeah i couldnt find a 91 pickup in there,, there was a 93
For the most part, 22RE = 22RE, so a '93 22RE is the same as a '91 22RE.
Reply
Old Aug 1, 2012 | 10:13 AM
  #5  
Dutter's Avatar
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 82
Likes: 0
From: paradise CA
oh duh, guess i wasnt thinking, and alost do i have a speedo cable or is it electronic mine went out
Reply
Old Aug 1, 2012 | 10:22 AM
  #6  
4Crawler's Avatar
Contributing Member
20 Year Member
iTrader: (3)
 
Joined: Jun 2002
Posts: 10,821
Likes: 34
From: SF Bay Area, CA
Originally Posted by Dutter
oh duh, guess i wasnt thinking, and alost do i have a speedo cable or is it electronic mine went out
Easy enough to look at the back of the t-case (passenger side). If you see a cable:



That is what you have, if you see a couple of wires plugged into a speedo sender, then you have electronic.
Reply
Old Aug 1, 2012 | 03:32 PM
  #7  
Dutter's Avatar
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 82
Likes: 0
From: paradise CA
yep it was cable, thanks
Reply
Old Aug 1, 2012 | 07:21 PM
  #8  
Dutter's Avatar
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 82
Likes: 0
From: paradise CA
oh one other thing,, were do theyy usually break and can i just replace the cable
Reply
Old Aug 1, 2012 | 08:12 PM
  #9  
4Crawler's Avatar
Contributing Member
20 Year Member
iTrader: (3)
 
Joined: Jun 2002
Posts: 10,821
Likes: 34
From: SF Bay Area, CA
Originally Posted by Dutter
oh one other thing,, were do theyy usually break and can i just replace the cable
Probably pull the cable and see if the drive gear is intact and attached. If so, you could try spinning up the cable and see if it spins up at the speedo end, or run it with an electric drill and see if the speedo needle moves. If not, the cable may have snapped and you need to replace it.
Reply
Old Aug 1, 2012 | 09:57 PM
  #10  
Dutter's Avatar
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 82
Likes: 0
From: paradise CA
alrightty ill check that out tomorrow
Reply
Old Aug 7, 2012 | 04:08 PM
  #11  
Dutter's Avatar
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 82
Likes: 0
From: paradise CA
well i took it off and tried to spin it and it wouldnt spin its just twist the stop,, what do i do from here
Reply
Old Aug 7, 2012 | 04:18 PM
  #12  
4Crawler's Avatar
Contributing Member
20 Year Member
iTrader: (3)
 
Joined: Jun 2002
Posts: 10,821
Likes: 34
From: SF Bay Area, CA
Originally Posted by Dutter
well i took it off and tried to spin it and it wouldnt spin its just twist the stop,, what do i do from here
Guess it depends on which end you took off and spun. If it was at the t-case end, then that says something in the cable up to the speedo is sticking. Could be the cable has snapped and the broken end is stuck in the housing and not letting it spin. Or it could be the speedo itself seized, you could check that by disconnecting the cable on the back of the speedo and see if it'll spin with both ends loose. If not, cable is toast, if so, speedo is toast.
Reply
Old Aug 7, 2012 | 04:33 PM
  #13  
Dutter's Avatar
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 82
Likes: 0
From: paradise CA
alright will do thanks
Reply
Old Aug 7, 2012 | 05:17 PM
  #14  
Dutter's Avatar
Thread Starter
Registered User
 
Joined: Jul 2012
Posts: 82
Likes: 0
From: paradise CA
yep cables broke, i twisted it harder and it all slide out
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smthwsn357
86-95 Trucks & 4Runners
15
May 1, 2024 07:28 AM
shisha1999
84-85 Trucks & 4Runners
12
Sep 21, 2015 08:22 PM
sanctfy
All Other Toyota Swaps
6
Sep 15, 2015 02:52 PM
toyocruise
Early Land Cruisers
0
Aug 6, 2015 04:43 PM
shisha1999
84-85 Trucks & 4Runners
1
Jul 13, 2015 11:09 PM




All times are GMT -8. The time now is 07:26 AM.