84-85 Trucks & 4Runners 2nd gen pickups and 1st gen 4Runners with solid front axles

turn the key to the on position distributor is sparky

Thread Tools
 
Search this Thread
 
Old Nov 1, 2011 | 02:17 PM
  #1  
toy-ota4runner's Avatar
Thread Starter
Registered User
 
Joined: Nov 2011
Posts: 1
Likes: 0
Angry turn the key to the on position distributor is sparking.

I just got this toyota multiple problems. First vacuum hoses were all scattered. Put them back where I thought they need to be. Spark plug wires were not where they needed to be put them back. Replace the timing chains noticed that the cam was 180 degrees off fix that. But I am still at square one, when I go to start it, it will start but when I let off on the key is dies.

Last edited by toy-ota4runner; Nov 1, 2011 at 02:25 PM.
Reply
Old Nov 4, 2011 | 11:04 AM
  #2  
85TurboRunner's Avatar
Registered User
 
Joined: Aug 2004
Posts: 2,077
Likes: 1
From: Vancouver, WA
Maybe do a little searching around the site first.

I'm just gonna guess you have a 4runner 84 or 85? Depending on which year you'll have a 22r or a 22re.

Little more help.
Reply
Old Nov 4, 2011 | 01:41 PM
  #3  
peow130's Avatar
Registered User
 
Joined: Sep 2008
Posts: 3,887
Likes: 16
From: Spokane, WA
So you can start it, then when you release they key from the "start position" into the "on" position, the engine dies?

Does your ignitor get power in the on position?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gary4runner
Newbie Tech Section
3
Sep 24, 2015 12:53 AM
RustBucket
86-95 Trucks & 4Runners
14
Jul 24, 2015 04:46 AM
Hamonacracker
86-95 Trucks & 4Runners
7
Jul 17, 2015 08:33 AM
ZONAYODA
86-95 Trucks & 4Runners
12
Jul 13, 2015 07:17 PM
smiley52
86-95 Trucks & 4Runners
8
Jul 11, 2015 05:16 AM




All times are GMT -8. The time now is 05:54 AM.