I am looking for a set of uniball upper arms for a 96-04 tacoma either from Camburg, Total Chaos or Donahoe/Icon. Let me know if you have a set. Thanks

 

I have a pair. $500 complete

 

Who made those?

 

I did

You can see perfect penetration in this shot.

waaaay overbuuilt with .120 1.5" chromoly!


Trust me, you want these arms! Complete with bushings and uni-balls installed. I only use the best chromoly FK uniballs. These are quality.

 

I just built these:
This jig has a point to clear for the coil bucket and the hose on my coilover, I used 9/16" steel rod.

I tapered the edge of this washer then welded it to the plate. This centers the uniball cup.


cup bolted in and tubing notched. I tapered the top washer to center the cup as well

perfectly notched, no gaps





as you can see, but the heat the penetration is excellent

Done, which would you rather have? 1 1/4" or 1 1/2" sickass arms?



I'm all ready to make a couple more sets:yes:

 

Id would like to pick up a pair of these, how many have you made/sold? do you have pictures of them on any rigs?

 

bump to the top

 

Have you posted up on TacomaWorld? Probably would have better luck over there.

 

I dropped the ball on this thread. This post was made when I was working 12-16 hr. days so it fell thru the cracks.

In about 4weeks we'll back to the wacky long hours, in the mean time I can make a set of these if anybody needs em. I'm about 2 weeks out right now.

Keith

 

Bump to the top

 

you still haven't found a pair?

 

Bought a different Tacoma so I thought I would just bump my old thread instead of starting a new one

 

Bump to the top