WTB Uniball Upper Arms Camburg, Total Chaos, or Donahoe/Icon
#1
Registered User
Thread Starter
Join Date: Apr 2010
Location: Pismo Beach, Ca
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
WTB Uniball Upper Arms Camburg, Total Chaos, or Donahoe/Icon
I am looking for a set of uniball upper arms for a 96-04 tacoma either from Camburg, Total Chaos or Donahoe/Icon. Let me know if you have a set. Thanks
#2
#4
I did
You can see perfect penetration in this shot.
waaaay overbuuilt with .120 1.5" chromoly!
Trust me, you want these arms! Complete with bushings and uni-balls installed. I only use the best chromoly FK uniballs. These are quality.
You can see perfect penetration in this shot.
waaaay overbuuilt with .120 1.5" chromoly!
Trust me, you want these arms! Complete with bushings and uni-balls installed. I only use the best chromoly FK uniballs. These are quality.
Last edited by dirtydeeds; 12-13-2010 at 07:59 AM.
#5
I just built these:
This jig has a point to clear for the coil bucket and the hose on my coilover, I used 9/16" steel rod.
I tapered the edge of this washer then welded it to the plate. This centers the uniball cup.
cup bolted in and tubing notched. I tapered the top washer to center the cup as well
perfectly notched, no gaps
as you can see, but the heat the penetration is excellent
Done, which would you rather have? 1 1/4" or 1 1/2" sickass arms?
I'm all ready to make a couple more sets:yes:
This jig has a point to clear for the coil bucket and the hose on my coilover, I used 9/16" steel rod.
I tapered the edge of this washer then welded it to the plate. This centers the uniball cup.
cup bolted in and tubing notched. I tapered the top washer to center the cup as well
perfectly notched, no gaps
as you can see, but the heat the penetration is excellent
Done, which would you rather have? 1 1/4" or 1 1/2" sickass arms?
I'm all ready to make a couple more sets:yes:
#6
Registered User
Join Date: Dec 2007
Location: OC, California
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I just built these:
This jig has a point to clear for the coil bucket and the hose on my coilover, I used 9/16" steel rod.
I tapered the edge of this washer then welded it to the plate. This centers the uniball cup.
cup bolted in and tubing notched. I tapered the top washer to center the cup as well
perfectly notched, no gaps
as you can see, but the heat the penetration is excellent
Done, which would you rather have? 1 1/4" or 1 1/2" sickass arms?
I'm all ready to make a couple more sets:yes:
This jig has a point to clear for the coil bucket and the hose on my coilover, I used 9/16" steel rod.
I tapered the edge of this washer then welded it to the plate. This centers the uniball cup.
cup bolted in and tubing notched. I tapered the top washer to center the cup as well
perfectly notched, no gaps
as you can see, but the heat the penetration is excellent
Done, which would you rather have? 1 1/4" or 1 1/2" sickass arms?
I'm all ready to make a couple more sets:yes:
Id would like to pick up a pair of these, how many have you made/sold? do you have pictures of them on any rigs?
Trending Topics
#9
In about 4weeks we'll back to the wacky long hours, in the mean time I can make a set of these if anybody needs em. I'm about 2 weeks out right now.
Keith
#12
Registered User
Thread Starter
Join Date: Apr 2010
Location: Pismo Beach, Ca
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
5
06-13-2022 07:40 PM
nvwiggins
86-95 Trucks & 4Runners (Build-Up Section)
13
06-16-2016 03:05 PM
LotOMiles
95.5-2004 Tacomas & 96-2002 4Runners
8
09-14-2015 11:45 PM