The rubber grommet I am referring to is the rubber grommet that the fuel injectors plugs into on the motor. Anyone know the part # for this so I can order a new set online? My vehicle is a '90 v6 3.0 5spd. Thanks.

 

90480-13005

I never tire of the parts # game!

Thanks for playing!

 

That was quick. Thank you!

 

If you're going to be pulling the intake off anyway, why not replace all the rubber and plastic? $25 bucks shipped:

http://cgi.ebay.com/ebaymotors/Fuel-...Q5fAccessories

 

UH-OH!!!

I believe I may have given you the right part # for the wrong part!!!!

That's not the part that the actual injector assembly plugs into on the motor end. It's called a spacer. And it isn't rubber, but a hard-type plastic, but has it's own rubber o-ring to seal it to the intake manifold. I hope that's not what you're looking to replace...but I'm afraid it may be.

DAMN!!!

The spacer is part # 90561-10002 and the o-ring for it is 90301-23004.

What threw me was the word "rubber".

FRICK!!!

You win...I lose...STUPID MudHippy...STUPID.

So what do I owe ya?

It's a long shot, but you don't mean the insulator on the tip of the injector where it plugs into the spacer do ya? That's a different part # too.

 

No worries I didn't order it, because I bought that same kit DJ99 posted up. Thanks for your help.

 

PHEW!!!

What a relief!!!

That rubber grommet, part # 90480-13005, would be the one for the top of the injector where it plugs into the fuel rail.

EDIT: Here's the scoop on what's what.

FUEL INJECTOR O-RING 23250B [Part# 90301-07001]
GROMMET 23250C [Part# 90480-13005]
INJECTOR INSULATOR 23291 [Part# 23291-41010]
SPACER [Part# 90561-10002]
O-RING [Part# 90301-23004]

 

Call this number and tell the gal who answers what you need:
RC ENGINEERING 310-320-2277

They know their stuff and can be helpful.