Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

So i have a new noise in my 22re

Thread Tools
 
Search this Thread
 
Old Mar 26, 2009 | 07:13 PM
  #1  
Kiroshu's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 2,747
Likes: 3
From: NC
So i have a new noise in my 22re

So today on my way home from college i noticed a differnet kind of noise emerged from the depths of my 22re. Most of you have prolly seen my youtube video of my toyota at idle. If not search on youtube "22re idle" mines the first one. anyway everyother valve chatter is still there but a noise only under accleration its kinda like a sprin like chatter not valve but somethin else....
Reply
Old Mar 26, 2009 | 07:29 PM
  #2  
toyota4x4907's Avatar
Registered User
 
Joined: Sep 2008
Posts: 4,355
Likes: 2
From: middle of no where Alaska
Thats a little vague

try to determine where abouts on the engine its coming from. Maybe get another sound clip if you can.
Reply
Old Mar 26, 2009 | 07:47 PM
  #3  
Kiroshu's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 2,747
Likes: 3
From: NC
Yea i'm gonna video it tomarrow but its like a more noticeable and louder tapping/springy/pingy sound. And really only happens under acceleration.
Reply
Old Mar 26, 2009 | 07:50 PM
  #4  
a4runnerfreak's Avatar
Registered User
 
Joined: Jul 2008
Posts: 4,592
Likes: 0
From: Grew up in S.C.V, So Cal.....now in Hampstead, NC
Pingy? Change gas recently? Same octane?
Reply
Old Mar 26, 2009 | 07:51 PM
  #5  
toyota4x4907's Avatar
Registered User
 
Joined: Sep 2008
Posts: 4,355
Likes: 2
From: middle of no where Alaska
oh a pingy sound?...you might have spark knock or preignition or whatever you want to call it. try running a higher grade fuel. Try using an engine cleaner (SeaFoam, or what have you) if you haven't already.
New plugs, wires, rotor and cap if you haven't already. Make sure they are the right heat range and gapped correctly.

Last edited by toyota4x4907; Mar 26, 2009 at 07:52 PM.
Reply
Old Mar 26, 2009 | 08:02 PM
  #6  
894x4pickup's Avatar
Registered User
 
Joined: Jun 2008
Posts: 218
Likes: 1
From: Gig Harbor, WA
If everything else fails...

check the ujoints

From experience...for the longest time it just squeaked/ticked/made dying squirrel noises...couldnt figure out what the grading metal noise was...turned out the ujoint was completely dry and actually grooved the race of the bearing...probably not this, but just a suggestion.
Reply
Old Mar 26, 2009 | 08:14 PM
  #7  
Kiroshu's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 2,747
Likes: 3
From: NC
It only happens under increased Rpms even when sitting. It has an full entire new tune-up and i recently seafoamed it 2 weeks ago. Gas i'm about to fill it up tomarrow it has some lil old gas in it thats been it for like a few weeks.
Reply
Old Mar 26, 2009 | 08:32 PM
  #8  
iamsuperbleeder's Avatar
Contributing Member
 
Joined: Feb 2008
Posts: 12,248
Likes: 33
From: Lake City, Fl
exhaust leak
Reply
Old Mar 26, 2009 | 09:01 PM
  #9  
Ed H.'s Avatar
Registered User
 
Joined: Nov 2008
Posts: 261
Likes: 0
From: Oakley Ca
Timing chain, broken guide maybe
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mskalmus
86-95 Trucks & 4Runners
9
May 28, 2017 07:51 AM
coleypull15
86-95 Trucks & 4Runners
24
Nov 3, 2015 07:41 AM
PlayAwhile
86-95 Trucks & 4Runners
5
Jul 20, 2015 11:36 AM
Jeffreynmandy
86-95 Trucks & 4Runners
21
Jul 18, 2015 08:26 AM
razorman8669
86-95 Trucks & 4Runners
9
Jul 12, 2015 12:13 PM




All times are GMT -8. The time now is 03:40 PM.