Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

1994 3.0 starter

Thread Tools
 
Search this Thread
 
Old May 15, 2008 | 09:06 PM
  #1  
TomkiRider's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 278
Likes: 0
From: Boonies
1994 3.0 starter

Well yesterday my starter went out. im gettin a bump start from a friend in the mornin and goin to the shop where they have a new one waitng for me. theyre gonna run the test to make sure its my starter not the solenoid. this isnt a common problem for these trucks is it? i have 2 friends that have the same engine and both have over 150k miles and have never changed the starter
Reply
Old May 15, 2008 | 09:15 PM
  #2  
ozziesironmanoffroad's Avatar
Registered User
 
Joined: Sep 2007
Posts: 6,002
Likes: 1
From: Spring Valley, CA
not sure, but with my 22re ive had to change the starter 3 times in 150,000 miles... so not sure... but it did get like 140,000 or so on the original one.
Reply
Old May 15, 2008 | 09:16 PM
  #3  
TomkiRider's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 278
Likes: 0
From: Boonies
ya im at 145k
Reply
Old May 15, 2008 | 11:17 PM
  #4  
bill buttermore's Avatar
Registered User
 
Joined: Mar 2008
Posts: 32
Likes: 1
From: Ames, Iowa
I think your starter is made with replaceable copper solenoid contacts available from the dealer for less than $10. Often these just wear down to the point where electrical contact can not be made and the starter cannot be energized. You may want to check that out before committing to the new starter. Or, at least, take your old one apart and see if that is all that is wrong. If you can fix the old one for $10, it may be worth paying the core on the new one (if any) to keep the old one as a back-up.
Reply
Old May 16, 2008 | 05:24 AM
  #5  
TomkiRider's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 278
Likes: 0
From: Boonies
ya im runnin the test at the shop
Reply
Old May 16, 2008 | 04:56 PM
  #6  
TomkiRider's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 278
Likes: 0
From: Boonies
well my friend couldnt make it this mornin so it didnt happen. how fast does it have to be goin to bump start it?
Reply
Old May 16, 2008 | 05:30 PM
  #7  
mt_goat's Avatar
Contributing Member
 
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
Originally Posted by bill buttermore
I think your starter is made with replaceable copper solenoid contacts available from the dealer for less than $10. Often these just wear down to the point where electrical contact can not be made and the starter cannot be energized. You may want to check that out before committing to the new starter. Or, at least, take your old one apart and see if that is all that is wrong. If you can fix the old one for $10, it may be worth paying the core on the new one (if any) to keep the old one as a back-up.
X2...http://www.4crawler.com/4x4/CheapTri...OnlineOrdering
Reply
Old May 16, 2008 | 06:19 PM
  #8  
abecedarian's Avatar
Registered User
 
Joined: Mar 2008
Posts: 12,723
Likes: 6
From: Temecula Valley, CA
Originally Posted by TomkiRider
well my friend couldnt make it this mornin so it didnt happen. how fast does it have to be goin to bump start it?
Depends on which direction you're travelling in.
But basically, 2-5 miles per hour will start it, as long as you're quick on the clutch and there isn't any other reason why the truck won't start. If you can't hit 2 MPH...maybe put the transfer case in 4-lo... that'll make the engine spin over quite a bit more, but will also hurt your kidneys.

Last edited by abecedarian; May 16, 2008 at 06:21 PM.
Reply
Old May 16, 2008 | 06:26 PM
  #9  
TomkiRider's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 278
Likes: 0
From: Boonies
k thx. ill easly be able to hit 5. would 10 be to fast?
Reply
Old May 16, 2008 | 06:50 PM
  #10  
bigt's Avatar
Registered User
 
Joined: Nov 2007
Posts: 3,278
Likes: 2
From: chippawa niagara falls ontario
ummm 10 isnt too fast... just make sure your clear ahead " no kids"... you could try cleaning the contacts??? you can replace the starter in your driveway if you have extensions ,u-joints ,metrics sockets... also the brushes can be replaced dont give your toyota starter for a noname!!!! FIX IT
Reply
Old May 16, 2008 | 07:36 PM
  #11  
TomkiRider's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 278
Likes: 0
From: Boonies
exactly thats why im running the test when i go in to the auto parts store BEFORE buying the starter
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
toyotamonster
3.4 Swaps
7
Apr 16, 2020 06:02 PM
Doug4320
86-95 Trucks & 4Runners
19
Mar 24, 2018 10:11 PM
Road Bull
86-95 Trucks & 4Runners
23
Oct 10, 2015 04:55 PM
clok
86-95 Trucks & 4Runners
1
Aug 1, 2015 09:42 PM
ZONAYODA
86-95 Trucks & 4Runners
12
Jul 13, 2015 07:17 PM




All times are GMT -8. The time now is 01:03 AM.