Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Rough idle, white smoke, clean oil, losing water, and gas like smell from radiator???

Thread Tools
 
Search this Thread
 
Old Mar 3, 2007 | 06:54 PM
  #1  
kmchby76's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 226
Likes: 0
From: Elk Grove, CA
Rough idle, white smoke, clean oil, losing water, and gas like smell from radiator???

Ok, I have a mystery here. My brother in law's 95 3.slow is acting wierd. As of now, no cel. Start the runner and it has a very rough idle and dies. Some white smoke from the tail pipe, not heavy just light. Loses water, and a gas like smell from the radiator. The oils is clean, no sign of water. Is it possible for water and gas to mix in the intake manifold or anywhere else. Have not been able to do a compression test yet, but will try this week. Is it still possible to have a blown head gasket and not have water and oil mixing on the dip stick?
Reply
Old Mar 3, 2007 | 08:46 PM
  #2  
TNRabbit's Avatar
Contributing Member
 
Joined: Apr 2006
Posts: 4,787
Likes: 36
From: TENN Native Languishing in Virginia
Can you say BLOWN HEAD GASKET?!? Head gasket doesn't necessarily mean oil/coolant mix; depends on where it blows. But it definitely sounds blown. Compression test first. Coolant system leakdown test second while plugs are still out from compression test, then if coolant is indeed leaking out somewhere, turn over engine & look for the cylinder blowing water out. You can get a nice coolant tester & compression tester for about $110 total from Sears.
Reply
Old Mar 3, 2007 | 08:49 PM
  #3  
curtiswyant's Avatar
Registered User
 
Joined: May 2006
Posts: 177
Likes: 0
You've got problems...pull the heads, probably time for a complete top-end overhaul.
Reply
Old Mar 3, 2007 | 10:31 PM
  #4  
notanymore's Avatar
Registered User
 
Joined: Dec 2006
Posts: 972
Likes: 0
From: Wenatchee WA
that sounds like a hg to me, and with the 3.0 its not too unusual
Reply
Old Mar 3, 2007 | 10:57 PM
  #5  
DudeBud's Avatar
Contributing Member
 
Joined: Mar 2005
Posts: 1,871
Likes: 0
From: WA ,monroe
typical 3.blow. not all do it, but most do.. good luck
Reply
Old Mar 4, 2007 | 09:30 AM
  #6  
kmchby76's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 226
Likes: 0
From: Elk Grove, CA
Thanks all, I always assumed a bhg meant oil and water mix. Does anyone have or seen a write up on replacing the hg on a 3.slow?
Reply
Old Mar 4, 2007 | 10:34 AM
  #7  
TNRabbit's Avatar
Contributing Member
 
Joined: Apr 2006
Posts: 4,787
Likes: 36
From: TENN Native Languishing in Virginia
Originally Posted by kmchby76
Thanks all, I always assumed a bhg meant oil and water mix. Does anyone have or seen a write up on replacing the hg on a 3.slow?
OMG! There are at least a hundred threads on this; get a new one every month! Go to advance search, type in blown head gasket and search away! The FSM link at the top of this forum is ESPECIALLY helpful...
good luck.
Reply
Old Mar 4, 2007 | 10:54 AM
  #8  
kmchby76's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 226
Likes: 0
From: Elk Grove, CA
Originally Posted by TNRabbit
OMG! There are at least a hundred threads on this; get a new one every month! Go to advance search, type in blown head gasket and search away! The FSM link at the top of this forum is ESPECIALLY helpful...
good luck.
Thanks for the suggestion, but I must be missing something because I can't find the FSM link.
Reply
Old Mar 5, 2007 | 06:59 AM
  #9  
TNRabbit's Avatar
Contributing Member
 
Joined: Apr 2006
Posts: 4,787
Likes: 36
From: TENN Native Languishing in Virginia
Originally Posted by kmchby76
Thanks for the suggestion, but I must be missing something because I can't find the FSM link.
My bad; we have it posted on www.toyotanation.com

http://personal.utulsa.edu/~nathan-b...fsm/index.html
Reply
Old Mar 5, 2007 | 07:02 AM
  #10  
kmchby76's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 226
Likes: 0
From: Elk Grove, CA
Originally Posted by TNRabbit
Thanks TNRabbit!!
Reply
Old Mar 5, 2007 | 07:28 AM
  #11  
rdlsz24's Avatar
Registered User
 
Joined: Sep 2005
Posts: 1,481
Likes: 6
From: Northern IL
Originally Posted by kmchby76
Thanks all, I always assumed a bhg meant oil and water mix. Does anyone have or seen a write up on replacing the hg on a 3.slow?
Not neccessarily. On my 22RE I had a blown headgasket but it was leaking down the side of the block near the #4 cylinder. I didn't have mixing going on, but was loosing coolant at an alarming rate. I finally figured out what was causing it when I heard a hissing noise when I stopped driving one day and traced the noise to where the head meets the block and could see bubbles.

Rob
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigjstang
86-95 Trucks & 4Runners
21
Jun 2, 2025 03:56 PM
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
Jul 9, 2015 07:55 AM
Cplmike
Newbie Tech Section
5
Jul 8, 2015 08:47 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM




All times are GMT -8. The time now is 06:02 PM.