will a 22r flywheel work on a 22re engine? I know the clutch kit is different between the two, but what if you used the clutch and flywheel from a 22r , would it work ok?

highway

 

yes.. and who said the clutches are different.

 

the part #'s are different (figured it may be the throw out bearing being different)....... my nephew bought a rebuilt 22re and he said his pressure plate wouldnt bolt up to the flywheel. we had figured his maybe someone had installed a 22r engine in his truck before he got a hold of it. so he took his flywheel/clutch and bolted it up to the new engine but i didnt know if the weight/balance was the same.

highway

 

20r 22r 22re flywheels between 79-95 are basically the same and are interchangeable .

later years they went to a larger clutch dic surface , but flywheels are the same .

 

There is some sort of part number difference in the later 22re's - I think it was a change in spring design, but they should fit.

22RTE flywheels and clutches are different from 22R/22RE - I see a lot of jacked up non-OEM parts numbers that list 22R/22RE/22RTE as the same parts.

 

as far as i know the only thing that changed between 22r and 22re was the fuel delivery, one being carbed the other injected. so it should be fine

 

Will the 2wd and 4wd flywheels interchange? I have purchased the 4wd clutch and pressure plate for my 2wd by accident and I was wondering if I could just swap to the 4wd flywheel and have a larger clutch in my 2wd.

 

yes ..