Took a stab at building a bumper today. (pic heavy)
#1
Registered User
Thread Starter
Join Date: Apr 2008
Location: Sheridan, Wyoming
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Took a stab at building a bumper today. (pic heavy)
Well, i thaught i would try it. Now before everyone starts yelling at me cuz im not using 1.25 dom blah blah tubing and my welds suck and im only using factory mounts and "wheres the winch at?" I dont have the money, tools nor the skills to justify using the dom stuff. My welding sucks i know, noones ever taught me i just started doing it in my driveway one day. This is my first real "fab" as far as im concerned and i just wanted to see if i counld make something "mean looking with no real plan. and i like what i made so there haha.
this is what i started with...
then i made a second set of tabs and a second bar for the base
then i made this square thingy and welded it to the bars at almost the same angle as the maximum approach angle...
then i added another part above that stuff and back...
then i braced it to the front box thing...
then i bent a couple peices to go around the side
then i braced that from the bottom...
then the top...
and that was it for tonight
Tomorrow im going to finish welding all the back side stuff and paint it all, i might add some more cuz my girlfriend had a couple ideas of what i could add to the top but we'll see what it looks like painted and whatnot.
this is what i started with...
then i made a second set of tabs and a second bar for the base
then i made this square thingy and welded it to the bars at almost the same angle as the maximum approach angle...
then i added another part above that stuff and back...
then i braced it to the front box thing...
then i bent a couple peices to go around the side
then i braced that from the bottom...
then the top...
and that was it for tonight
Tomorrow im going to finish welding all the back side stuff and paint it all, i might add some more cuz my girlfriend had a couple ideas of what i could add to the top but we'll see what it looks like painted and whatnot.
#2
that does not look like it would hold up to much, no one said anything about DOM, all my stuff is HREW at it does good. and 1.25" is too small, 1.5" is where its at. At least you did all the work yourself, looks like you had a fun little project.
#5
Good start. Here are my pointers:
1. Use bigger tube. That tiny bar isn't going to hold up to anything. It cant hold a winch, and if you hit anything its going to fold like toothpicks.
2. Work on your welding. I know you are just starting...but those booger welds look like you were not getting any penetration
3. In reference to #1, when you go larger, don't use solid bar
1. Use bigger tube. That tiny bar isn't going to hold up to anything. It cant hold a winch, and if you hit anything its going to fold like toothpicks.
2. Work on your welding. I know you are just starting...but those booger welds look like you were not getting any penetration
3. In reference to #1, when you go larger, don't use solid bar
#7
Registered User
Thread Starter
Join Date: Apr 2008
Location: Sheridan, Wyoming
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
haha i know its bad as far as strength and i should have used different stuff but i was bored and i get this stuff for free. Not to take blame away from my lack of real welding experience but the welder im using is horrible for this kinda stuff, it's shielding gas system doesnt work and it doesnt take flux core and it has no power whatsoever, my welds arent so bugerish when i have a "real" welder but this is all i have at my house. Im not expecting it to take much of a hit, i just kinda wanted to make something. Although i made some addons to my rear bumper with this stuff and me and a couple buddies picked the back end of the truck off the ground and moved it overf a couple feet with just that bar stuff. (at least my welds held)
Trending Topics
#8
Registered User
Join Date: Sep 2002
Location: Littleton, CO
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Without gas, and not using flux core, and without removing the mill scale from the steel, it's amazing you were able to weld at all.
A for effort. Won't hold up. You knew that.
Get the welder fixed and practice, practice, practice. Grind off the mill scale before trying to weld. You'll be amazed at the difference.
A for effort. Won't hold up. You knew that.
Get the welder fixed and practice, practice, practice. Grind off the mill scale before trying to weld. You'll be amazed at the difference.
#9
Registered User
Your Welds suck and you need to use larger tube. Ha ha ha you ask for it
Practice your welds you are not getting any penetration,
Also clean the steel to shinny shinny metal when your welding, you will get
better results and a cleaner weld.
Another tip for welding, the trick is to get a puddle of hot molten steal by making C shaped passes, once the puddle forms you need to either push or pull the puddle with C passes
Heres a good resource: http://www.mig-welding.co.uk/learning-mig.htm
Good Video
http://www.mig-welding.co.uk/flash/c...aying-weld.swf
Practice your welds you are not getting any penetration,
Also clean the steel to shinny shinny metal when your welding, you will get
better results and a cleaner weld.
Another tip for welding, the trick is to get a puddle of hot molten steal by making C shaped passes, once the puddle forms you need to either push or pull the puddle with C passes
Heres a good resource: http://www.mig-welding.co.uk/learning-mig.htm
Good Video
http://www.mig-welding.co.uk/flash/c...aying-weld.swf
#11
Registered User
Join Date: Jul 2003
Location: Race City USA (Mooresville, NC - LKN)
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
turn that bitch up as hot as it will go, unless its a 220. if its a gas welder and you dont have any gas than you are wasting your time.
I would practice welding on that bumper, I bet if you drop it it will fall apart. metal needs to be bare.
hey atleast you didnt pay somebody $$$$ and get that, Ive been thru that, and you gotta start somewhere. I started just welding crap together and it turned into a sculpture.....
I use 1.75 x .120 DOM (Drawn Over Mandrel... no seam inside) or HREW (Hot Rolled Electric Welded.... seam on inside
I would practice welding on that bumper, I bet if you drop it it will fall apart. metal needs to be bare.
hey atleast you didnt pay somebody $$$$ and get that, Ive been thru that, and you gotta start somewhere. I started just welding crap together and it turned into a sculpture.....
I use 1.75 x .120 DOM (Drawn Over Mandrel... no seam inside) or HREW (Hot Rolled Electric Welded.... seam on inside
#12
Registered User
I would recommend practicing on scrap or coupons...this is the first thing we ever welded...its a knight in shining armor....made from rebar and a ford taurus fender
#14
Well, you are practicing and that is good. You seem to know the limits of your craftsmanship, so that is good too.
No-one here was born knowing how to fabricate. Don't let them fool you into thinking that they were.
I like the idea of practicing on "artwork".
No-one here was born knowing how to fabricate. Don't let them fool you into thinking that they were.
I like the idea of practicing on "artwork".
#15
Registered User
Join Date: Feb 2008
Location: Dallas
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
#16
Registered User
Thread Starter
Join Date: Apr 2008
Location: Sheridan, Wyoming
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
haha i was trying to avoid what kind of welder it is, but yeah its turned up all the way. Its deffinately not made for this kinda stuff but i did drop it and it didnt break so there hah, ( iwouldnt do it again though haha)
and about the little c's, thats what my buddy has been telling me and i try to do it but im not very good at it with this welder, it doesnt hold a hot blob thing for long but thanks for the tips guys. like i said having a real welder realy helps my work haha but thats an excuse and excuses suck
and about the little c's, thats what my buddy has been telling me and i try to do it but im not very good at it with this welder, it doesnt hold a hot blob thing for long but thanks for the tips guys. like i said having a real welder realy helps my work haha but thats an excuse and excuses suck
#17
Registered User
Thread Starter
Join Date: Apr 2008
Location: Sheridan, Wyoming
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
So heres what it looks like all painted up, i would appreciate your guys' thaughts on at least if it looks good not so much the build of it (i think we know its not strong enough for much) haha
#18
Registered User
Join Date: Jan 2008
Location: Parker, CO
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
You've definately got the right idea, some more practice and appropriate material and that same design could work very well. As for the strength, don't feel too bad, the stock bumpers wouldn't hold up to much either. Nice looking truck by the way.
Last edited by hurley842002; 06-02-2008 at 07:35 PM.
#19
Registered User
Looks wise? It looks like absolute poop. I can't lie to you.... it is NOT functional, adds weight, and is embarassing to other yota owners...
you DID ask..
Last edited by dirtoyboy; 06-03-2008 at 04:51 AM.
#20
I have to agree. It looks pretty bad. Not the design so much, but the way it is put together is pretty ugly. Bars lapped over the top of each other with crumby welds takes away from the appeal right away.
I'm only saying this because you asked for opinions. You are learning, and as I said before, that is a good thing.
Other than that, if there is a bright spot in the whole thing, I thought that the bend you did to go around the corner fit well and looks good.
Buy the right material, get a cheap tubing notcher, and even that crumby welder will be able to make something that looks way better.
I'm only saying this because you asked for opinions. You are learning, and as I said before, that is a good thing.
Other than that, if there is a bright spot in the whole thing, I thought that the bend you did to go around the corner fit well and looks good.
Buy the right material, get a cheap tubing notcher, and even that crumby welder will be able to make something that looks way better.