So Nice!

 

Makes me want my SAS now... Very nice Marc!

David

 

Thanks David....I am keeping an eye on your build too

 

Doesn't look like there's much daylight between your front bumpstops. How's your ride?

My springs are settling and I need to fix that before I hit the dirt roads to the trailheads...

 

I have about 3 inches of up travel, and the bumpstops give a little....the ride is pretty good. I don't drive my truck very much, so I dont worry too much about the ride.

Look at the last few sec of this video...lots of flex

http://www.protrux.net/videos/Super9.mov

 

Oh my...what to install first?? It is Christmas in Feb!!!!

Actually..they are in order of install.

 

Thought I would update my thread again....had some more work done

I had my driveshafts re-worked..basically had the rear yoke put on the front shaft and the front yoke pu on the rear shaft..is that confusing?

Old rear driveshaft..could not be balanced because yoke is industrial. Caused vibrations at speeds over 45mph



New rear driveshaft with stock Yota yoke...no more vibs



Old front...only had about 1.5 inches of compression..I was worried about bottoming it out



New front

 

I also replaced my worn out shocks with some MX-6 adjustables...FREEBIE

In the rear I added adapters so I could run the new shocks



New flex shots on my very own "poser rock"

 

looks great marc. i really need to get down there and wheel with you guys soon...

 

http://www.protrux.net/videos/wheelstand.mov

 

Had to throw that one in there Seth....I like that video, unfortunatly it is history now.....

The last few seconds of the video you made for Superstition 9 is of the same spot, and I took the same line...

http://www.youtube.com/watch?v=epDk4CXvDrc

 

Yeah, that's why I posted it. I watched the Super9 video. It's just a testement to how much better your current setup is. Fix that damn Tcase!

 

I havent updated this much recently, because I havent done much. My e-locker and roll bar are still in the garage waiting for install.

I did do some rear suspension work this weekend.

I ditched the stock FJ80 coils I have been running. They made my rear end way too soft...they were replaced with OME 860's. Came out good, and feels much better...

before




After...beefy




Some day I may do a leaf sway in the rear, but this should do for now :thumbup:

 

Nice. Makes my truck look tiny.

 

I dont update this thread much anymore, and now with Imagestation shutting their picture hosting website, most of the pictures will be red X's in a couple months....

I have been wheeling...havent done any mods really....still have the roll bar and e-locker sitting on the garage floor.

Couple new pics I transfered over to a new host...

 

nice... it was pretty much your SAS that caused me to pull the trigger on mine last year. if you need to make room in you garage, that elocker can find a new home

 

Thats funny because your SAS on fab'n stuff triggered me to do mine.

 

see marc.... your evil

 

marc imagestation is shutting down?

 

Well I can blame Robinhood and 4runnerkid...


Yes Imagestation is closing down. I need to transfer 400+ pictures to Photbucket now.....that sucks!