making friends, learn some new things
03-22-2013, 02:36 PM
#45
Registered User
Join Date: Jul 2012
Location: Seattle, WA
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
03-23-2013, 01:58 PM
#49
Registered User
Join Date: Jul 2012
Location: Seattle, WA
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
I have a little one that I carry with me that plugs in to the cigarette lighter for emergencies, but it would probably take hours to air us back up so if it needs to be used for an emergency I've got one, if it's for airing up, not so much.
03-28-2013, 10:09 PM
#52
Registered User
Thread Starter
Join Date: Mar 2012
Location: Tacoma Washington
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
04-30-2013, 08:34 PM
#54
Registered User
Join Date: Apr 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I am sorry for jumping into this thread but new to site and wont ˟˟˟˟ing let me sdtart my own anyways complete rebuild on 89 toyota pickup 3.0 now it just idles and when you give it gas it just wants to die fir a second than idles up this truck starts good and idles good just wont rev timing is exactly 12 degrees btdc using timing light tried ten and does the same thing i used the vacum diagram and everything is right new cap and plugs and wires please help
04-30-2013, 09:34 PM
#55
Registered User
Thread Starter
Join Date: Mar 2012
Location: Tacoma Washington
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Dos it throw any codes? Sounds like it could be your throttle position sensor, I'll give a couple of my friends a ring, see if they have any ideas
04-30-2013, 10:00 PM
#56
Registered User
Join Date: Apr 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
It has a lot of codes even one for an intercooler lol there is at least 20 codes cant clear them Iv doubleheader all the vacuum lines and tried two knock sensors and tps sensors blocked the fuel vacuum checked the timing New cap and rotors and plugs
p
p
05-01-2013, 07:18 AM
#57
Registered User
clean your MAF/verify connector is seated in the MAF tightly, check you PCV valve (impossible to do unless you take off the intake manifold), could be your O2 sensor, verify firing order for plug wires from your distributor......just a couple of things to check out
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
madxman21
86-95 Trucks & 4Runners
2
07-09-2015 10:26 AM
