How much torque to slip a lunchbox locker?
09-17-2012 | 08:01 PM
#1
Thread Starter
Registered User
Joined: Sep 2012
Posts: 14
Likes: 0
From: Ridgway, Colorado
How much torque to slip a lunchbox locker?
I just put an Detroit EZ locker in the front diff. If I put a socket on a wheel nut (with that one wheel in the air), how much torque should I expect to apply and hear it slip/click? I expected it to click while doing up the wheel nuts but it didn't.
10-16-2012 | 05:01 PM
#3
Registered User
Joined: Oct 2002
Posts: 500
Likes: 2
From: CA
wait...
thats not how it works. It ratchets, not slips. In order for it to ratchet by hand, you would have to jack up the front, lock both hubs, spin one tire backward slightly then forward and you should hear it clickityclackity all you want.
thats not how it works. It ratchets, not slips. In order for it to ratchet by hand, you would have to jack up the front, lock both hubs, spin one tire backward slightly then forward and you should hear it clickityclackity all you want.
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
02-15-2020 06:55 AM
83yotastockR
86-95 Trucks & 4Runners (Build-Up Section)
11
11-10-2015 06:54 AM
Toys4parts
86-95 Trucks & 4Runners (Build-Up Section)
2
09-26-2015 01:56 PM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
09-24-2015 03:30 PM
