Hello, just wondering if anyone could tell me how excactly to attach a quick disconnect hose onto an air compressor.

or lead me in the direction of a website to tell me how to do it,

thanks
wade

 

I have A/C air, connected to a tank and a sensor for turning off the compressor when it's full.

 

Just get one of these and attach it to your air system, to the tank, to the end of a hose, etc.:



More info: http://www.4crawler.com/4x4/ForSale/4air.shtml#Chucks

 

... get a tank and connect the AC to the tank.. then lead a hose from the tank and have the quick disconnect there..

less chance of blowing a hose, more air when you need it etc..

 

how should i go about connecting the ac to the tank though.

wade

 

... and you need to find a good tank / cylinder.

On mine the AC sucks air from the air cleaner box, then on the out air hose it's connected to a air / oil seperator, and a thin hose cycles the oil back to the intake for the AC. Afther that you can do whatever you want, I would route the air to the tank. Then from the tank I would run a hose to a sensor, that will cut the power for the AC off at 100psi. then you can have a other hoses connected to that for whatever you'd like to do with the air.. I use it for both the locker and a quick connect mounted on the rear of the truck for pumping the tires.

 

Get one of these kits:

http://www.frontrangeoffroadfab.com/manifold.htm