Installed an aussie locker in a pals pickup tonight. The third was built, it was the easyest thing ever. any dork could do it in 4 hours. noobs, don't even sweat it.

 

really? any write ups? im plannin on putting a locker into mine. Is it engage manually or auto?

 

I dropped an Aussie in about a month ago and I love it. It was a cinch to install. Took me about 6 hours to install because I'm a "noob" and I worked alone. The writeup that I used to go with the instructions Aussie sent me is over on the 4x4wire board:

http://www.4x4wire.com/toyota/tech/lockright_locker/

Really all you need to know about it even if you've never pulled a diff before.

The Aussie is an automatic Locker. It unlocks in the turns as long as you don't mash down the gas pedal. Behind my auto transmission, I hardly hear it nor realize its there until I have a rear wheel off the ground and I'm still moving foward.

 

moved to off road tech.

 

I did a write-up on one... http://gearinstalls.com/aussielocker.htm

 

I love mine. Took around 5 hours for me to install. After driving with it for a while I hardly notice it anymore. Lockers help a ton on the trail and are a blast in the snow!