FirstGen_Issac

I Found a few wrecked Tundra, I have a 2004 2WD DC and wanted to know what years can I buy for the 4wd parts. Mainly wondering if the 4wd ecu and harness are the same. thank you

FirstGen_Issac

Did you end up doing this?

witman69

No Sir. I never got confirmation from anyone who used an 05. I plan to buy a 2010 4wd at some point. Br Jerry

hunterm12

I went to the junk yard and found a 4wd sequoia and pulled all the parts but the transmission is a knob shifter and not a button shifter would this still work?

theferg

I know this is a few months old now, but do you mean transfer case is knob shift? Cause, yes, the manual lever shift Sequoia transfer case will work fine in the tundra. Its been done in 4x4 Tundras just for the fact of having the manual lever instead of the button push. Also has been used in other conversions as well.

I'm not certain, but you *might* have to cut open the trans tunnel a bit (for the shift lever) and then you would need the Sequoia shift cover that will fit right into the Tundra center console (or if no center console, just use a shift boot from like a tacoma or t-100)