Rear main on 96 T100
Dec 27, 2004 | 04:41 AM
#1
Thread Starter
Registered User
Joined: Dec 2004
Posts: 1
Likes: 0
Rear main on 96 T100
Hello All..Anyone have any advice on changing the rear main seal on my 96 T100 (3.4L, automatic trans).. I've done lots of rear mains but never of this veh. Can the seal be pulled without dropping the pan?...thanks
Dec 27, 2004 | 05:11 PM
#2
Registered User
Joined: Sep 2003
Posts: 139
Likes: 1
From: Parrish, FL
I think that you can pull the rear main without pulling the pan. It should be in a special seal holder that comes out with four or five 10mm bolts. But I dont think that you need to pull that out. Post how it is. I need to do mine (leaking about 3 quarts per 5000miles).
Andrew
Andrew
Thread
Thread Starter
Forum
Replies
Last Post
Yotadawgjr
95.5-2004 Tacomas & 96-2002 4Runners
10
Aug 23, 2015 10:51 AM
toyoda8488
84-85 Trucks & 4Runners (Build-Up Section)
2
Jul 5, 2015 10:18 PM
