ADH8796's 1999 4Runner Build-Up Thread
Jul 20, 2009 | 07:41 PM
#41
Thread Starter
Contributing Member
Joined: Nov 2005
Posts: 1,150
Likes: 0
From: Fayetteville, AR
Yeah, I am being torn in a few different directions at this point. If I go 295/75/16, I will need spacers and 1" BL. If I go 255/85/16 I will need a 1" BL, but no spacers. 285/75/16 will need a 1/4" spacer. The jacked up thing is that the cheapest tires in each range I want are the KM2s in the 255 size.
So, you are running 285s with 1/4 spacer up front alone, right? Would the 295 require more of a spacer? Remember that I running OME heavies with stock A-Arms.
So, you are running 285s with 1/4 spacer up front alone, right? Would the 295 require more of a spacer? Remember that I running OME heavies with stock A-Arms.
Jul 20, 2009 | 07:51 PM
#42
I like the look of the KM2's. That's correct I'm running 285's with 1/4" spacers up front alone. As long as the 295's are 295/75 they shouldn't be any wider than the 285's and therefore all you should need is the 1/4" spacers and you should be fine. Might want to double check me on the measurements/ width of the 295's.
I have been eyeballing the Nitto A/Ts. Summit's price is $169.95/ea and shipping is dirt cheap at $9/tire.
Jul 20, 2009 | 08:35 PM
#43
Thread Starter
Contributing Member
Joined: Nov 2005
Posts: 1,150
Likes: 0
From: Fayetteville, AR
In that case you would probably need something just a little bigger as far as spacers go. But anything bigger than a 1/4 and you might as well make it good grad bolt on spacers.
Jul 25, 2009 | 04:11 PM
#44
Registered User
Joined: Apr 2007
Posts: 200
Likes: 0
From: Centerton,AR
You need to pick up that 00' and we can all go wheel together. Of course I'll need to install a locker to keep up with you cool kids.
Last edited by aviator31; Jul 25, 2009 at 04:14 PM.
Nov 3, 2009 | 02:01 PM
#46
Registered User
Joined: Oct 2009
Posts: 15
Likes: 0
From: Vegas
Where do you buy OME shocks and coils?? I googled their name but some BS site came up & nothing on Ebay.. I'd like to try and find the best prices.. any suggestions?
.. I've talked to you a bit via PM.. want to do the rear now.. thinking about going coilover for the front in a few weeks.
.. I've talked to you a bit via PM.. want to do the rear now.. thinking about going coilover for the front in a few weeks.
Nov 3, 2009 | 02:51 PM
#47
Where do you buy OME shocks and coils?? I googled their name but some BS site came up & nothing on Ebay.. I'd like to try and find the best prices.. any suggestions?
.. I've talked to you a bit via PM.. want to do the rear now.. thinking about going coilover for the front in a few weeks.
.. I've talked to you a bit via PM.. want to do the rear now.. thinking about going coilover for the front in a few weeks.
http://www.addictedoffroad.com/3rdgen4runner.html
Nov 5, 2009 | 08:48 AM
#48
Thread Starter
Contributing Member
Joined: Nov 2005
Posts: 1,150
Likes: 0
From: Fayetteville, AR
Where do you buy OME shocks and coils?? I googled their name but some BS site came up & nothing on Ebay.. I'd like to try and find the best prices.. any suggestions?
.. I've talked to you a bit via PM.. want to do the rear now.. thinking about going coilover for the front in a few weeks.
.. I've talked to you a bit via PM.. want to do the rear now.. thinking about going coilover for the front in a few weeks.
But I wouldn't hesitate to order anything from ScottyC he is very helpful and a great vendor.
Apr 17, 2010 | 05:50 PM
#50
Thread Starter
Contributing Member
Joined: Nov 2005
Posts: 1,150
Likes: 0
From: Fayetteville, AR
Update: I found a good deal on a nice TJM T-15 so I snatched it up and decided while I was at it I would go ahead and build my rear bumper. Rear bumper build is here https://www.yotatech.com/forums/f88/...nstall-209808/
Apr 23, 2010 | 12:45 AM
#52
Registered User
Joined: Jan 2009
Posts: 60
Likes: 0
That's sick! Too bad I don't want to change anything out on my runner right now otherwise I'd over that setup! Kudos to u sir! What size and brand tires are those? Thanks for sharing!
Last edited by dropzone; Apr 24, 2010 at 06:04 PM.
Apr 24, 2010 | 10:37 AM
#53
Thread Starter
Contributing Member
Joined: Nov 2005
Posts: 1,150
Likes: 0
From: Fayetteville, AR
Apr 30, 2010 | 09:59 PM
#54
Registered User
Joined: May 2003
Posts: 149
Likes: 0
From: NorTah
Hadn't seen the update on your rig yet. Looks great! Makes me almost miss that TJM... 
Glad it all worked out. Nice work on the rear bumper as well.
-Ferg-
Glad it all worked out. Nice work on the rear bumper as well.-Ferg-
Last edited by theferg; Apr 30, 2010 at 10:01 PM.
Jul 26, 2010 | 01:58 PM
#57
Thread Starter
Contributing Member
Joined: Nov 2005
Posts: 1,150
Likes: 0
From: Fayetteville, AR
Little Video from a wheeling trip to Disney, OK a few weeks ago.
http://www.youtube.com/watch?v=EtUwvRuBOFY
http://www.youtube.com/watch?v=EtUwvRuBOFY
Jul 26, 2010 | 02:39 PM
#58
Thread Starter
Contributing Member
Joined: Nov 2005
Posts: 1,150
Likes: 0
From: Fayetteville, AR
Last edited by Fink; Jul 26, 2010 at 02:43 PM.
Jul 26, 2010 | 02:44 PM
#59
Contributing Member
Joined: Jul 2003
Posts: 9,076
Likes: 0
From: Orlando, FL
What's up dude? Congrats on the wedding by the way, I'm sorry I couldn't make it - tickets are really expensive this time of year.
Rig is looking awesome man.
I fixed your YouTube video for you, it's embedded now.
Fink
Rig is looking awesome man.
I fixed your YouTube video for you, it's embedded now.
Fink
