--- URD 2.2" Supercharger Pulley (On order)
--- AIRAID M.I.T. ( On order)
--- IPT Valve body Job
--- PIAA 1500 rear Back up lights

 

Tacoma:
interior/footwell light mod
reinstall air horns

4runner:
headers
free flow cat
Seafoam
sparkplugs
Herculine interior
replace center console
repaint cage
rewire roof lights
interior lights
starter kill/hood lock
the list goes on...

 

Snorkel
Flex-a-lite fan
Roof Rack
New BFG M/T's
New Steering Rack
Manual Hub Conversion
Long Travel Susp. like BruceTS's
New clutch

 

haveblue, let us know how the rotors turn out. i was planning to buy some drilled rotors as well since they'll need to be replaced soon. i have seen some reviews but it never hurts to have another opinion.

 

Get Revos installed (265's)
Install Tundra front brakes
Build bolt on sliders
Build front bumper w/winch mount
Build rear bumper w/hitch
Build functional safari rack
E-locker

Wish list?
Sell 4runner, buy Tundra 4dr 4wd

 

Well I was planning on ARB with 4.88, sway bars w/ quick discos, re-gear front. But since I seized my engine all that is on the back burner.

 

I'm staring at the winch on the floor right now. Waiting fot he synthetic line and aluminum fairlead to show up before I go about installing it. Have to take it to Demello's to have some fab work done on the front bumper to make the hole for the fairlead and stuff.

Hopefully this will be scratched off the list by week's end.

 

Mine is ever-changing, seems endless...
On the pending list, more or less in order-
Finish the power window install
Finish the power locks/remotes install
Finish the cruise control install
Upgrade the speakers
Finish the custom winch mount, brush bar
Custom rear bumper
Custom spare tire mount
Custom grill (I hate the orange paint)
New rear springs
New shocks
Manual front hubs
Headers and exhaust


Wish list -
V8 swap


Wild dreams wish list -
Custom coil spring 4-link type suspension conversion w/ SAS
and - because I like my stuff to be different from the next guys' -
http://www.fordmuscle.com/archives/2...er/index.shtml

 

New driveshafts (F & R)
Sliders
Front and rear tube bumpers
winch
gears/lockers (4.88s and ARBs)

My new 32 gallon fuel cell is in the living room ready to be installed, new FROR tcase mount/skid went on last weekend (pics coming when the truck comes back after my fab guy finishes welding on the sliders)



yes my credit card is smoking slightly at the moment with more damage to come, gotta keep going to work so i can support my extravagent spending habbits

 

Near Future:
Full length roof rack
Hella FF75's mounted on roof rack, driving in front, fog for reverse
Electric fan, FAL or Taurus
Install the 1.5" lift with ball joint spacers and rear springs with Pro Comp 3000's sitting on my garage floor.
Some new BFG 32x11.5's
4.88's
Synthetic winch line
Staun internal beadlocks


Far Future:
(After paying off rebuild)
3" All Pro or Marlin SAS, not sure which one yet.
BFG 33x12.5
3.4 swap With tranny, transfer case & crawler

 

Sitting in the living room: 16x8 MT Classic II's
On backorder from PP: PP Springs and bilsteins
They will both be goin on the runner as soon as the springs and shocks get here, Then comes the 32" Revos

Few weeks after that: new exhaust, as i'm undecided as which set up to go with; then some new brakes, maybe brembos

 

Install my taurus fan
change my roof rack to one with tracks so I don't have to have those cross bars up there all the time killing my fuel economy (they make a noticable difference)
aisin hubs
driving/fog lights
sr5 seats...

oh yeah and fix broken rear spring

 

I have only three:

1. Pay off both vehicles ASAP.
2. Get two titles form the bank stamped "NO LEIN".
3. Yell "I'm debt free!!!!" at the top of my lungs as I ensure that I'll never get a loan to buy a vehicle ever again.

Misc. mods to come after that if desired and my wife lets me!

 

"..if desired and my wife lets me!"

I nominate that statement for the Truest Words of the Week Award!

 

You gonna call Dave Ramsey and say that? haha.

 

winch
winchbumper(allpro)
rear bumper (allpro)
32's
4:88 gears

 

• pull intake plenum/valve cover/pcv valve and clean, polish, replace as needed
• rebuild power steering pump
• rebuild idler arm
• rebuild steering gear box
• dynamat tailgate
• 7mge AFM mod
• AF guage on pillar
• repainting gauge trim to match exterior
• seafoam my engine *biting nails*
• reshim my valves

The AFM mod is about done as is the AF guage and repainted gauge trim...

 

Well, I can take the Tundra front brakes off my list now. Got them done tonight!!!! MUCH BETTER!!!

 

Get some coustom front and rear bumpers made
sliders
winch
4.88 gears
33's
rear locker of some sort
Paint the truck white again since the paint is flaking off the hood and I want to weld up a couple holes.