WATTORA Show & Shine
#22
Thread Starter
Co-Founder/Administrator
iTrader: (1)
Joined: May 2002
Posts: 32,242
Likes: 22
From: Auburn, Washington
Grimace, sorry we missed you. We left about 1:45 PM.
It was a poor turnout do to not enough advanced notice.
It was pretty overcast today too.
Did not get a whole lot of pics.
The president of the WA chapter of TTORA has a pretty impressive Taco.
Factory locker in the rear, and an ARB IFS Air Locker up front.
He has a bracket he made on his ARB bumper for the on board air hose, and two more holes drilled into the bracket for his future on board shower set up.
Same shower setup I'm going with.
Here are the few pics I got.
Shot of Gene & I
Same
The money bucket
same
Service Manager Matt's 4 door Taco
Rob's (TTORA President Taco)
Same
Same, notice the synth winch line, and on board air quick disco
Did not get his name. He's running Demello Off Road sliderz, the same as Rob's
Same
Rob's Fabtech coil overs
Bill's rig
Same
Some of the stuff from my cargo box
Group shot
Notice the laptop on Rob's hood. With that he can tie into his rigs computer and make timing adjustments in real time. Other adjustments can be done too. I did not realize this could be done.
I was pretty impressed.
He is going to have another meet there this fall, and hopefully with enough notice more will show up this time.
Rob's Taco will also be sporting a new 6" lift come Monday.
He's going to have to cut the cross member out, and lower the diff some.
After the new lift is in, the CV boot angles will be straighter than a stock rig almost, even after he dial in some lift with the Fabtech's too.
Gene's rig is pretty sharp. He also has on board air via ARB air-comp that powers his ARB Air Locker in the rear.
You will also notice on Rob's and Matt's grilles that it is chrome that surrounds it.
Toyota has a dark gray one that replaces that, and Rob will be sportin' one of those soon.
That will look great with his bumper.
Corey
It was a poor turnout do to not enough advanced notice.
It was pretty overcast today too.
Did not get a whole lot of pics.
The president of the WA chapter of TTORA has a pretty impressive Taco.
Factory locker in the rear, and an ARB IFS Air Locker up front.
He has a bracket he made on his ARB bumper for the on board air hose, and two more holes drilled into the bracket for his future on board shower set up.
Same shower setup I'm going with.
Here are the few pics I got.
Shot of Gene & I
Same
The money bucket
same
Service Manager Matt's 4 door Taco
Rob's (TTORA President Taco)
Same
Same, notice the synth winch line, and on board air quick disco
Did not get his name. He's running Demello Off Road sliderz, the same as Rob's
Same
Rob's Fabtech coil overs
Bill's rig
Same
Some of the stuff from my cargo box
Group shot
Notice the laptop on Rob's hood. With that he can tie into his rigs computer and make timing adjustments in real time. Other adjustments can be done too. I did not realize this could be done.
I was pretty impressed.
He is going to have another meet there this fall, and hopefully with enough notice more will show up this time.
Rob's Taco will also be sporting a new 6" lift come Monday.
He's going to have to cut the cross member out, and lower the diff some.
After the new lift is in, the CV boot angles will be straighter than a stock rig almost, even after he dial in some lift with the Fabtech's too.
Gene's rig is pretty sharp. He also has on board air via ARB air-comp that powers his ARB Air Locker in the rear.
You will also notice on Rob's and Matt's grilles that it is chrome that surrounds it.
Toyota has a dark gray one that replaces that, and Rob will be sportin' one of those soon.
That will look great with his bumper.
Corey
#24
Hey Guys,
Sorry I missed it. I would have contributed if I could.
Hope some of the other tacos showed up throughout the day.
Pretty busy weekend though.
Of course all of your rigs shined sooo sweeet. Made the rest of us proud!!!
Suffering from a pretty fun camping trip.
Sorry I missed it. I would have contributed if I could.
Hope some of the other tacos showed up throughout the day.
Pretty busy weekend though.
Of course all of your rigs shined sooo sweeet. Made the rest of us proud!!!
Suffering from a pretty fun camping trip.
Last edited by smr4runner; Aug 11, 2002 at 06:14 PM.
#25
Hey Corey,
Sorry I din't show up in time. I got into seattle at 1:30. So Ithought it was too late to come by. I saw where you worked though. man that plant is huge. They were having some sort of famliy day going on. I tried to get in but they wouldn't let me.
Till next time....
Dave
Sorry I din't show up in time. I got into seattle at 1:30. So Ithought it was too late to come by. I saw where you worked though. man that plant is huge. They were having some sort of famliy day going on. I tried to get in but they wouldn't let me.
Till next time....
Dave
Thread
Thread Starter
Forum
Replies
Last Post
Dale Johnston
86-95 Trucks & 4Runners (Build-Up Section)
11
Oct 31, 2015 10:22 PM
Toys4parts
86-95 Trucks & 4Runners (Build-Up Section)
2
Sep 26, 2015 01:56 PM




