TRDOLMAN's Dyno Day
#1
TRDOLMAN's Dyno Day
Went back to the dyno today for a couple of runs.
Dyno with 2.0" pulley: 275.1 RWHP @ 313.7 ft lbs of torque
Dyno with 2.2" pulley: 267.2 RWHP @ 290.2 ft lbs of torque
Run sheets are in the webshots link in my gallery.
What do you guys think about those numbers for a 4X4 auto?
Dave
Dyno with 2.0" pulley: 275.1 RWHP @ 313.7 ft lbs of torque
Dyno with 2.2" pulley: 267.2 RWHP @ 290.2 ft lbs of torque
Run sheets are in the webshots link in my gallery.
What do you guys think about those numbers for a 4X4 auto?
Dave
#2
Originally Posted by TRDOLMAN
Went back to the dyno today for a couple of runs.
Dyno with 2.0" pulley: 275.1 RWHP @ 313.7 ft lbs of torque
Dyno with 2.2" pulley: 267.2 RWHP @ 290.2 ft lbs of torque
Run sheets are in the webshots link in my gallery.
What do you guys think about those numbers for a 4X4 auto?
Dave
Dyno with 2.0" pulley: 275.1 RWHP @ 313.7 ft lbs of torque
Dyno with 2.2" pulley: 267.2 RWHP @ 290.2 ft lbs of torque
Run sheets are in the webshots link in my gallery.
What do you guys think about those numbers for a 4X4 auto?
Dave
I am getting together w/ Gadget this weekend. time to dial mine in.
#5
Originally Posted by turboale
Awesome...
Can't wait til I can do my fuel mods.... How do you like the aquamist?
Can't wait til I can do my fuel mods.... How do you like the aquamist?
I use IK20's gapped at .032. Those are one step colder than stock. They are single electrode plugs BTW. If you want 2 steps colder, use the iridium IK22's. URD recommends the 22's with their fuel kit gapped at .043.
Dave
#6
Regarding plugs... eBay's a gold mine for pricing...
Set of 6 IK20's for $45 (+ $7.96 shipping)
Set of 6 IK22's for $60 (+ $6.96 shipping)
Gadget's at $72 + ($7 shipping) for IK22's
Set of 6 IK20's for $45 (+ $7.96 shipping)
Set of 6 IK22's for $60 (+ $6.96 shipping)
Gadget's at $72 + ($7 shipping) for IK22's
#7
Awesome!
Thanks guys! They are the stockers... (dumbass
) but what is the consensus on the single electrode? Why did toyota say use double? You guys think the two step colder plugs would be a bit much for stock boost?
Thanks guys! They are the stockers... (dumbass
) but what is the consensus on the single electrode? Why did toyota say use double? You guys think the two step colder plugs would be a bit much for stock boost?
Last edited by turboale; Feb 21, 2005 at 01:31 PM.
Trending Topics
#8
Originally Posted by TRDOLMAN
Went back to the dyno today for a couple of runs.
Dyno with 2.0" pulley: 275.1 RWHP @ 313.7 ft lbs of torque
Dyno with 2.2" pulley: 267.2 RWHP @ 290.2 ft lbs of torque
Run sheets are in the webshots link in my gallery.
What do you guys think about those numbers for a 4X4 auto?
Dave
Dyno with 2.0" pulley: 275.1 RWHP @ 313.7 ft lbs of torque
Dyno with 2.2" pulley: 267.2 RWHP @ 290.2 ft lbs of torque
Run sheets are in the webshots link in my gallery.
What do you guys think about those numbers for a 4X4 auto?
Dave
#10
Originally Posted by bulldog-yota
Looks very impressive, but do you think your tranny will hold up with all the extra TQ???
Dave
#11
Originally Posted by MTL_4runner
Dave, that custom aquamist tank looks fantastic.
Who made that for you? .....or did you do it yourself?
Who made that for you? .....or did you do it yourself?
Dave
#12
Originally Posted by TRDOLMAN
Tranny valve body was modified by IPT when truck had 2600 miles on it. Burns rubber in second gear no prob. Valve body mod takes the slip out of these trannys and it makes them damn near bullet proof.
Dave
Dave
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
Jul 14, 2020 08:35 PM
ChiefTetlow
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
1
Aug 10, 2015 04:19 AM



I've been following your progress over on TTORA also. Keep up the good work.

