Request from those with Downeys
Dec 9, 2002 | 11:29 AM
#1
Thread Starter
Contributing Member
Joined: May 2002
Posts: 4,267
Likes: 1
From: Solano Co, CA Originally a North Idaho Hick
Request from those with Downeys
Hey guys I have a request for those of you with Downey coils on your 2nd Gens. I have found several write ups but none with any good pics. If you could take a few pics of how the extended braided brake line attaches, as well as where the LSPV bracket and the drop bracket for the ABS wire bolt on. There is also a pretty big washer in the kit that I haven't found mention of in any of the instructions. I have read numerous things about this but the pictures would be nice. Even better would be if someone could link to me a write up with pics. The one I have is from ODW. I am going to tackle this project this coming Sunday with the help of a buddy but neither of us have worked this extensively on a Yota before. It looks pretty easy but I have to pay for the garage I am using and really don't want to screw something up and have to leave it there overnight or something. Please email pics to UKMyers@Btinternet.com Thanks guys!
Last edited by UKMyers; Dec 9, 2002 at 11:35 AM.
Dec 10, 2002 | 12:04 AM
#3
Thread Starter
Contributing Member
Joined: May 2002
Posts: 4,267
Likes: 1
From: Solano Co, CA Originally a North Idaho Hick
Corey they should be here this week.. At least I hope they get here. I have been waiting since October to get all the parts I need. Anyone have any pics for me?
Dec 10, 2002 | 01:52 AM
#5
Thread Starter
Contributing Member
Joined: May 2002
Posts: 4,267
Likes: 1
From: Solano Co, CA Originally a North Idaho Hick
Corey thanks ALOT. As you see I posted on that thread but then never seen again after he posted the pictures. This will help me out alot I really appreciate it!
Dec 10, 2002 | 05:33 AM
#6
Contributing Member
Joined: Oct 2002
Posts: 900
Likes: 0
From: Dallas, TX
Well, I was going to say I have a few pics from when I did it, but metal22lica beat me to it. That brake line was a little tricky if you ask me. It took me a while to get the old one off. Spray the connection with WD-40 or some thing the night before. That was the one thing I didn't spray, and I almost stripped it. If you have any trouble feel free to shoot me an email.
Jeremy
Jeremy
Dec 10, 2002 | 06:28 AM
#7
Contributing Member
Joined: Oct 2002
Posts: 992
Likes: 0
From: Bradenton, Florida
glad i could help ya...i woke up at 4 in the morning and it took me 45 minutes to find that post. good luck with the install Joey!! dont forget before and after pics of the rear end sag.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: $180 BJ Spacers, 1.5 Rear Lift, Rancho RS5000 Shocks
jaretstuff
Axles - Suspensions - Tires - Wheels
5
Oct 22, 2015 05:25 PM
FS[SouthEast]: Brand new 26 mm. Downey torsion bars
HiLuxer
Axles - Suspensions - Tires - Wheels
2
Sep 9, 2015 02:43 PM
