Hey guys Im in the middle of the install, and for the rear I have the 2 springs one marked A and one B I know one of them goes on the driver side, its the A one right?

 

Longer one goes on the driver side.

 

Long story short my rear driver side was sagging so I was going to flip the springs. I compressed both of them pulled them out and I noticed an A/B sticker so I assumed it would save me tons of trobule from uncompressing them measuring them and recompressing them.

cheers

 

in the U.S., I think the B goes on driver's side and A goes on passenger ... no idea.

 

You can't pay attention to the lables. My 891's were labeled backwards, because they are a Australian product. Some come over here with the correct lables others don't.

 

I took your advice brother, uncompressed them checked them out and I HAD them set correctly, I have taken pictures, Ill post them tomorrow... very very strange... It's still lower on the drivers side.

 

how much gas is in your tank?

 

Lower by how much?

 

Well its usually lower by about an .75 to a whole inch which is VERY noticable but since I had just put them back on the difference was about half an inch which is still noticable but not so bad.

I had maybe half a tank of gas.