Question for Corey re: adding 4th gen lift info to tech section
#1
Guest
Thread Starter
Join Date: Jun 2003
Location: Last stop on the westcoast line
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
Question for Corey re: adding 4th gen lift info to tech section
Corey-
Hey, a few guys have requested that I put together a write up covering every angle and problem/solution that I encountered along the way while lifting my 4th gen Runner. I just need a little direction on how to do this, and I'll take care of it. Thanks.
Billy
Hey, a few guys have requested that I put together a write up covering every angle and problem/solution that I encountered along the way while lifting my 4th gen Runner. I just need a little direction on how to do this, and I'll take care of it. Thanks.
Billy
#2
Hi Bill, take a look at the Suspension Round-Up we have here that is listed on the page "YotaTech on the web" that in linked in the Community section.
That should give you an idea on how the write-ups in there are put together.
The pics need to be sized at 160x120 for the thumbnails, and 640x480 for the full size ones, and named fourunnabilly1.jpg fourunnabilly2.jpg, and the same with the thumbnails by inserting fourunnabillythumb1.jpg as the names.
Zip it all up and send me the pics & the text, and I will format it.
That should give you an idea on how the write-ups in there are put together.
The pics need to be sized at 160x120 for the thumbnails, and 640x480 for the full size ones, and named fourunnabilly1.jpg fourunnabilly2.jpg, and the same with the thumbnails by inserting fourunnabillythumb1.jpg as the names.
Zip it all up and send me the pics & the text, and I will format it.
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM