progress
09-11-2004, 05:03 PM
#1
Registered User
Thread Starter
Join Date: Sep 2004
Location: omaha
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
progress
made some progress today. install the efi igniter on to the 85 4runner. then removed some carb smog stuff. Plus i installed the harmonic balancer today on the new engine i got. Had to break out the blue wrench 
to get the bolt off.
to get the bolt off.
09-12-2004, 05:02 PM
#2
Registered User
Thread Starter
Join Date: Sep 2004
Location: omaha
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
well today i got the dash and engine wiring harness outta the 87. Then i got the 85's dash out today. and i installed the 87 computer into the 85. So far it's going great. I'll have a speedo with a rpm gauge and also have a tilt-meter. What i did for the wiring is grab a sharpie and labeled each connector. For exapmle 1A-1A. It's going to make wiring the thing so much easier. I also discovered that the heater box wiring different so i started unbolting the '87 h-box so. I don't have to do any hack&splicing wiring. The key is to take your time and label stuff. i started at 3:30 and got done at 7:00 not bad for 4 hrs work it was getting dark so i figured to call it a day 
Thread
Thread Starter
Forum
Replies
Last Post
LosPatosDelSur
86-95 Trucks & 4Runners (Build-Up Section)
23
03-12-2021 03:08 AM
genuinegemini
86-95 Trucks & 4Runners
2
08-03-2015 04:56 PM
jon.r
General Vehicle Related Topics (Non Year Related)
8
07-11-2015 03:34 PM
