to do the rear diff. breather mod today. should be in by tuesday. anyway, for those of you that have done it, what type tubing is the best? thanks.

 

Tubing with an opening on each end and a hole through the middle . Seriously any good vacuum tube or better yet fuel line will do just fine, you might want to top it with a filter to keep stuff out, I just used a cheapo plastic inline fuel filter on the end.

 

For tubing, I'd suggest Ace hardware. They have a selection or sizes, and I think even 2 or 3 colors! :tomcat:


(Sorry, I had to try out some of these new smileys!)

Zach

 

with tha nissan breather i used 7/32'' vaccum tubing with a fram G12 filter on tha end