Notices
95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

OME rear install??

Thread Tools
 
Search this Thread
 
Old 03-09-2007, 07:28 PM
  #21  
Registered User
Thread Starter
 
ozarks_Runner's Avatar
 
Join Date: Nov 2006
Location: Missouri Ozarks
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
Ah yes, bloody beer knuckles... I see them in front of me
I was told that with the 906's you didn't have to get all that stuff, but with the 890/891's the rear axle would be shifted a little and the rear tires wouldn't sit even in their wheel wells. When the rear was dropped down as far as it would go during install the stock lines were stretched to the max. You might not need them, but I'd sure hate to get some serious flex and bust one out on the trail.
Old 03-09-2007, 11:54 PM
  #22  
Registered User
 
etan's Avatar
 
Join Date: Jul 2006
Location: home:Oahu,Hawaii School: Fort Collins, CO
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
what a difference! very nice rig. now for some 285's.....haha


Originally Posted by Skrillah

The extended brake lines, e-brake, and panhard bar weren't required for the install though right? I mean you could do the lift and not worry about these things?
I didn't do any of these things. You just have to watch out for it. there are plenty of writeup and posts about panhard bar relocation brackets or extended ones. e-brake relocator relieves tension on the e-brake. as for the extended brake lines it all depends on if you plan to go wheeling and how extreme. but for me there is a lot of slack in my brake line.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
10-10-2015 09:40 PM
Road Bull
86-95 Trucks & 4Runners
23
10-10-2015 04:55 PM
icentropy
86-95 Trucks & 4Runners
7
07-14-2015 10:23 AM
MTLroadierunner
86-95 Trucks & 4Runners
0
07-06-2015 12:17 PM



Quick Reply: OME rear install??



All times are GMT -8. The time now is 04:20 AM.