hey good day, i was wondering if i could get leather seats for a 1990 4x4 standard bed and cab truck. I just dont know were i could get them.

also my buddys got a bench seat in his standard cab and he wants throw in some buckets. What does he have to do?

anyhelp is awsome

thanks

 

You can always go to an automotive leather place. They will usually put leather on almost anything. Even your door panels if you want it.
They usually cost around $1200 to put full leather on 4runner's that arent' available in leather. Maybe for a regular cab truck it'll be around $600?

 

Pull a couple of leather front seats from a 2nd gen 4Runner. Seems like a while back there was a guy in Houston trying to sell a couple in the "for sale" section.

 

Assuming your buddy's truck is a Tacoma....

The overall bolt pattern for bench and bucket seats for Tacomas of the same generation is identical. The single bench doesn't use all the 8 bolt holes the buckets (separate and 60/40's) use. In regular cabs with benches, the additional holes are either (a) pre-drilled and plugged or (b) pre-molded into the floor pan (and only need to be drilled / punched out). To swap compatible same-generation Taco seats into his regular cab is just a matter of opening up the additional holes and bolting the buckets right in.

 

yeh the trucks a dlx 4 cyl 1990 standard cab and bed 4x4

thanks

 

Oh, one other note about swapping Taco / pickup seats...

There may be height differences among the different types of pickup seats - even in the same model year. I've seen reports that the 60/40's sit up to 1" higher than the sport buckets, as well as reports that the buckets are noticeably lower than the corresponding single bench seat. The comments / reports I've seen have been scattered and fragmentary, so I can't go so far as to claim the height differential applies across all years.

 

http://leatherseats.com/ or http://www.katzkin.com/SITE/HTML/index.html look good to me, im planning on putting leather in mine, after the arb bumper, the bumper comes first, lol

 

yeah thanks again, it would be nice if i could get this stuff in B.C. Canada!

 

I hear that. I have been looking to get replacement covers for my factory leather and it is easier said than done.

 

I took the frames of my original seats to a friend, with the leather material and had her build me seat foams, seat padding, and upholster the front seats for 300 total, including labor and materials.... I know its a "good buddy deal" but I would check options on prices before spending a bunch of money.