ISR Mod w/Pics
Jan 27, 2003 | 06:14 AM
#1
Thread Starter
Contributing Member
Joined: Jan 2003
Posts: 10,916
Likes: 1
ISR Mod w/Pics
I know there are a couple links (Dr. Z, etc) for the ISR mod. But I would like to add my pictures to help those along who havent tried this really cool mod yet.
Be sure to reset the EFI, and use premium gas.
Here is the link for my ISR mod pics. Scroll down the thumbnailed pictures on the left (they are the 2 at the bottom).
It sure sounds great in addition to the A/E/D mods! (Amsoil, Elbow, Deckplate)
Be sure to reset the EFI, and use premium gas.
Here is the link for my ISR mod pics. Scroll down the thumbnailed pictures on the left (they are the 2 at the bottom).
It sure sounds great in addition to the A/E/D mods! (Amsoil, Elbow, Deckplate)
Last edited by rimpainter.com; Jan 27, 2003 at 01:30 PM.
Jan 27, 2003 | 02:17 PM
#4
Thread Starter
Contributing Member
Joined: Jan 2003
Posts: 10,916
Likes: 1
Mainly due to increase in airflow. It may also have something to do with the FPR vacuum line being there also.
All I know is that without premium fuel it pinged, and with it doesnt.
Dr Z will also make the same recommendation.
All I know is that without premium fuel it pinged, and with it doesnt.
Dr Z will also make the same recommendation.
Jan 27, 2003 | 05:53 PM
#6
Registered User
Joined: Dec 2002
Posts: 4,697
Likes: 0
From: Deep Gap, NC
You know what's funny! I have had a FIPK kit on my vehicle now for about 10K miles, and I've ran 87 octane with no pinging, which tells me that the ISR and Deckplate is a far better way to go. It definitely must let more air in than the FIPK from K&N. Proof is good! Anyone have a stock air box for sale?
Chris
Chris
Thread
Thread Starter
Forum
Replies
Last Post
TheBFA
Solid Axle Swaps, All Years
8
Feb 15, 2020 06:55 AM
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
53
Feb 1, 2016 05:46 AM
